* Pavel Machek [off-list ref] [161229 15:14]:

Hi!

I forgot I had v4.10-rc1 running, and now I got warning on all the
consoles (hand-copied).


Unhandled fault: external abort on non-linefetch (0x1028) at
0xfa0ab060
...
Comm: kworker/0:0 Not tainted.
Workqueue: events musb_irq_work
...
PC is at musb_default_readb().
...

This means the clocks are not enabled at that point.

WARNING: CPU: 0 ... at drivers/bus/omap_l3_smx.c:166
omap3_l3_app_irq+0xcc/...
Tainted: GDW.

If you comment out postcore_initcall_sync(omap3_l3_init);
in drivers/bus/omap_l3_smx.c you'll see the proper stack
trace instead of the l3 interrupt trace. The system will
hang at that point most likely.

I do have patches to allow nfsroot over usb. But they worked ok in
v4.9... Does anyone see it, too?

Hmm not much has changed since v4.9. Are you sure you
had v4.9 or some earlier v4.9-rc version?

Regards,

Tony