[PATCH v2 1/4] ARM: dts: davinci: da850: VPIF: add node and muxing

Add VPIF node an pins to da850 and enable on boards.  VPIF has two input
channels described using the standard DT ports and enpoints.

Signed-off-by: Kevin Hilman <khilman@baylibre.com>
---
 arch/arm/boot/dts/da850-evm.dts  |  6 ++++++
 arch/arm/boot/dts/da850-lcdk.dts |  6 ++++++
 arch/arm/boot/dts/da850.dtsi     | 38 +++++++++++++++++++++++++++++++++++-
 3 files changed, 49 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/da850-evm.dts

b/arch/arm/boot/dts/da850-evm.dts index 41de15fe15a2..212b50d4f84b 100644

--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts

@@ -289,3 +289,9 @@
 		};
 	};
 };
+
+&vpif {
+       pinctrl-names = "default";
+       pinctrl-0 = <&vpif_capture_pins>;
+       status = "okay";
+};

diff --git a/arch/arm/boot/dts/da850-lcdk.dts

b/arch/arm/boot/dts/da850-lcdk.dts index 7b8ab21fed6c..67f846f5bb35 100644

--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts

@@ -219,3 +219,9 @@
 		};
 	};
 };
+
+&vpif {
+       pinctrl-names = "default";
+       pinctrl-0 = <&vpif_capture_pins>;
+       status = "okay";
+};

diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index f79e1b91c680..dd2a13ed106e 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi

@@ -186,7 +186,18 @@
 					0xc 0x88888888 0xffffffff

 				>;

 			};
-
+			vpif_capture_pins: vpif_capture_pins {
+				pinctrl-single,bits = <
+					/* VP_DIN[2..7], VP_CLKIN1, VP_CLKIN0 

+					0x38 0x11111111 0xffffffff
+					/* VP_DIN[10..15,0..1] */
+					0x3c 0x11111111 0xffffffff
+					/* VP_DIN[8..9] */
+					0x40 0x00000011 0x000000ff
+					/* VP_CLKIN3, VP_CLKIN2 */
+					0x4c 0x00010100 0x000f0f00
+				>;
+			};
 		};
 		edma0: edma at 0 {
 			compatible = "ti,edma3-tpcc";

@@ -399,7 +410,32 @@
 				<&edma0 0 1>;
 			dma-names = "tx", "rx";
 		};
+
+		vpif: video at 217000 {
+			compatible = "ti,da850-vpif";
+			reg = <0x217000 0x1000>;
+			interrupts = <92>;
+			status = "disabled";
+
+			/* VPIF capture: input channels */
+			port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				vpif_ch0: endpoint at 0 {
+					  reg = <0>;
+					  bus-width = <8>;
+				};
+
+				vpif_ch1: endpoint at 1 {
+					  reg = <1>;
+					  bus-width = <8>;
+					  data-shift = <8>;
+				};

+			};
+		};
 	};
+
 	aemif: aemif at 68000000 {
 		compatible = "ti,da850-aemif";
 		#address-cells = <2>;