[RFC PATCH v3 11/11] arm64: Wire up and expose the new compat vDSO
flat view
STALE3532d
From: Kevin Brodsky <hidden>
Date: 2016-12-06 16:03:53
Subsystem:
arm64 port (aarch64 architecture), the rest · Maintainers:
Catalin Marinas, Will Deacon, Linus Torvalds
Expose the new compat vDSO via the COMPAT_VDSO config option. The option is not enabled in defconfig because we really need a 32-bit compiler this time, and we rely on the user to provide it themselves by setting CROSS_COMPILE_ARM32. Therefore enabling the option by default would make little sense, since the user must explicitly set a non-standard environment variable anyway. CONFIG_COMPAT_VDSO is not directly used in the code, because we want to ignore it (build as if it were not set) if the user didn't set CROSS_COMPILE_ARM32 properly. If the variable has been set to a valid prefix, CONFIG_VDSO32 will be set; this is the option that the code and Makefiles test. For more flexibility, like CROSS_COMPILE, CROSS_COMPILE_ARM32 can also be set via CONFIG_CROSS_COMPILE_ARM32 (the environment variable overrides the config option, as expected). Cc: Will Deacon <redacted> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Nathan Lynch <redacted> Cc: Christopher Covington <redacted> Cc: Dmitry Safonov <redacted> Cc: Jisheng Zhang <redacted> Signed-off-by: Kevin Brodsky <redacted> --- arch/arm64/Kconfig | 23 +++++++++++++++++++++++ arch/arm64/Makefile | 28 ++++++++++++++++++++++++++-- arch/arm64/kernel/Makefile | 8 ++++++-- 3 files changed, 55 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 265d88c44cfc..721b8151ff8c 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig@@ -1046,6 +1046,29 @@ config SYSVIPC_COMPAT def_bool y depends on COMPAT && SYSVIPC +config COMPAT_VDSO + bool "32-bit vDSO" + depends on COMPAT + default n + help + Warning: a 32-bit toolchain is necessary to build the vDSO. You + must explicitly define which toolchain should be used by setting + CROSS_COMPILE_ARM32 to the prefix of the 32-bit toolchain (same format + as CROSS_COMPILE). If a 32-bit compiler cannot be found, a warning + will be printed and the kernel will be built as if COMPAT_VDSO had not + been set. + + Provide a vDSO to 32-bit processes. It includes the symbols provided + by the vDSO from the 32-bit kernel, so that a 32-bit libc can use + the compat vDSO without modification. It also provides sigreturn + trampolines, replacing the sigreturn page. + +config CROSS_COMPILE_ARM32 + string "32-bit toolchain prefix" + help + Same as setting CROSS_COMPILE_ARM32 in the environment, but saved for + future builds. The environment variable overrides this config option. + endmenu menu "Power management options"
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 3635b8662724..370d8de0c100 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile@@ -37,10 +37,32 @@ $(warning LSE atomics not supported by binutils) endif endif -KBUILD_CFLAGS += -mgeneral-regs-only $(lseinstr) +ifeq ($(CONFIG_COMPAT_VDSO), y) + CROSS_COMPILE_ARM32 ?= $(CONFIG_CROSS_COMPILE_ARM32:"%"=%) + + # Check that the user has provided a valid prefix for the 32-bit toolchain. + # To prevent selecting the system gcc by default, the prefix is not allowed to + # be empty, unlike CROSS_COMPILE. In the unlikely event that the system gcc + # is actually the 32-bit ARM compiler to be used, the variable can be set to + # the dirname (e.g. CROSS_COMPILE_ARM32=/usr/bin/). + # Note: this Makefile is read both before and after regenerating the + # config (if needed). Any warning appearing before the config has been + # regenerated should be ignored. + ifeq ($(CROSS_COMPILE_ARM32),) + $(warning CROSS_COMPILE_ARM32 not defined or empty, the compat vDSO will not be built) + else ifeq ($(shell which $(CROSS_COMPILE_ARM32)gcc 2> /dev/null),) + $(warning $(CROSS_COMPILE_ARM32)gcc not found, the compat vDSO will not be built) + else + export CROSS_COMPILE_ARM32 + export CONFIG_VDSO32 := y + vdso32 := -DCONFIG_VDSO32=1 + endif +endif + +KBUILD_CFLAGS += -mgeneral-regs-only $(lseinstr) $(vdso32) KBUILD_CFLAGS += -fno-asynchronous-unwind-tables KBUILD_CFLAGS += $(call cc-option, -mpc-relative-literal-loads) -KBUILD_AFLAGS += $(lseinstr) +KBUILD_AFLAGS += $(lseinstr) $(vdso32) ifeq ($(CONFIG_CPU_BIG_ENDIAN), y) KBUILD_CPPFLAGS += -mbig-endian
@@ -139,6 +161,8 @@ archclean: prepare: vdso_prepare vdso_prepare: prepare0 $(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso include/generated/vdso-offsets.h + $(if $(CONFIG_VDSO32),$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 \ + include/generated/vdso32-offsets.h) define archhelp echo '* Image.gz - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)'
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index 0850506d0217..b0e1005037cd 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile@@ -27,8 +27,11 @@ OBJCOPYFLAGS := --prefix-symbols=__efistub_ $(obj)/%.stub.o: $(obj)/%.o FORCE $(call if_changed,objcopy) -arm64-obj-$(CONFIG_COMPAT) += sys32.o sigreturn32.o signal32.o \ - sys_compat.o entry32.o +arm64-obj-$(CONFIG_COMPAT) += sys32.o signal32.o sys_compat.o \ + entry32.o +ifneq ($(CONFIG_VDSO32),y) +arm64-obj-y += sigreturn32.o +endif arm64-obj-$(CONFIG_KUSER_HELPERS) += kuser32.o arm64-obj-$(CONFIG_FUNCTION_TRACER) += ftrace.o entry-ftrace.o arm64-obj-$(CONFIG_MODULES) += arm64ksyms.o module.o
@@ -53,6 +56,7 @@ arm64-obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o \ cpu-reset.o obj-y += $(arm64-obj-y) vdso/ probes/ +obj-$(CONFIG_VDSO32) += vdso32/ obj-m += $(arm64-obj-m) head-y := head.o extra-y += $(head-y) vmlinux.lds
--
2.10.2