[PATCH] ARM: dts: orion5x: fix number of sata port for linkstation ls-gl
DORMANTno replies
From: Gregory CLEMENT <hidden>
Date: 2016-12-05 15:41:43
Hi Roger, On lun., d?c. 05 2016, Roger Shimizu [off-list ref] wrote:
[CC Arnd Bergmann] On Fri, Dec 2, 2016 at 12:11 AM, Roger Shimizu [off-list ref] wrote:quoted
Bug report from Debian [0] shows there's minor changed model of Linkstation LS-GL that uses the 2nd SATA port of the SoC. So it's necessary to enable two SATA ports, though for that specific model only the 2nd one is used. [0] https://bugs.debian.org/845611 Fixes: b1742ffa9ddb ("ARM: dts: orion5x: add device tree for buffalo linkstation ls-gl") Reported-by: Ryan Tandy <redacted> Tested-by: Ryan Tandy <redacted> Signed-off-by: Roger Shimizu <redacted> --- arch/arm/boot/dts/orion5x-linkstation-lsgl.dts | 4 ++++ 1 file changed, 4 insertions(+)diff --git a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts index 1cf644b..51dc734 100644 --- a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts +++ b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts@@ -82,6 +82,10 @@ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; }; +&sata { + nr-ports = <2>; +}; + &ehci1 { status = "okay"; }; --2.10.2Is there any chance to get this simple fix into v4.9 or next v4.10? Thank you!
I can apply it on mvebu/fixes and make a pull request. But I don't know if Arnd or Olof will get it. Let's see ahow it goes. Gregory
-- Roger Shimizu, GMT +9 Tokyo PGP/GPG: 4096R/6C6ACD6417B3ACB1
-- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com