[PATCH 1/3] dt: pwm: lpc32xx: add description of clocks and #pwm-cells properties
DORMANTno replies
From: vz@mleia.com (Vladimir Zapolskiy)
Date: 2016-12-05 01:42:37
Also in:
linux-devicetree, linux-pwm
Subsystem:
open firmware and flattened device tree bindings, pwm subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Uwe Kleine-König, Linus Torvalds
Possibly related (same subject, not in this thread)
- 2017-02-07 · Re: [PATCH 1/3] dt: pwm: lpc32xx: add description of clocks and #pwm-cells properties · Rob Herring <robh@kernel.org>
- 2017-02-07 · Re: [PATCH 1/3] dt: pwm: lpc32xx: add description of clocks and #pwm-cells properties · Sylvain Lemieux <hidden>
- 2017-01-03 · Re: [PATCH 1/3] dt: pwm: lpc32xx: add description of clocks and #pwm-cells properties · Sylvain Lemieux <hidden>
- 2016-12-21 · Re: [PATCH 1/3] dt: pwm: lpc32xx: add description of clocks and #pwm-cells properties · Vladimir Zapolskiy <vz@mleia.com>
- 2016-12-09 · Re: [PATCH 1/3] dt: pwm: lpc32xx: add description of clocks and #pwm-cells properties · Vladimir Zapolskiy <vz@mleia.com>
NXP LPC32xx SoCs have two simple independent PWM controllers with a single output each, in this case there is no need to specify PWM channel argument on client side, one cell for setting PWM output frequency is sufficient. Another added to the description property 'clocks' has a standard meaning of a controller supply clock, in the LPC32xx User's Manual the clock is denoted as PWM1_CLK or PWM2_CLK clock. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> --- Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt b/Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt
index 74b5bc5..523d796 100644
--- a/Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt
+++ b/Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt@@ -3,15 +3,22 @@ LPC32XX PWM controller Required properties: - compatible: should be "nxp,lpc3220-pwm" - reg: physical base address and length of the controller's registers +- clocks: clock phandle and clock specifier pair +- #pwm-cells: should be 1, the cell is used to specify the period in + nanoseconds. Examples: pwm at 4005c000 { compatible = "nxp,lpc3220-pwm"; reg = <0x4005c000 0x4>; + clocks = <&clk LPC32XX_CLK_PWM1>; + #pwm-cells = <1>; }; pwm at 4005c004 { compatible = "nxp,lpc3220-pwm"; reg = <0x4005c004 0x4>; + clocks = <&clk LPC32XX_CLK_PWM2>; + #pwm-cells = <1>; };
--
2.10.2