[PATCH v3 5/5] arm64: dts: marvell: Enable spi0 on the board Armada-3720-db
DORMANTno replies
REVIEWED: 1 (0M)
From: Romain Perier <hidden>
Date: 2016-12-01 10:27:19
Also in:
linux-devicetree, linux-spi
Subsystem:
arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, the rest · Maintainers:
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Linus Torvalds
1 review trailer.
This commit enables the device node spi0 on the official development board for the Marvell Armada 3700. It also adds sub-node for the 128Mb SPI-NOR present on the board. Signed-off-by: Romain Perier <redacted> Tested-by: Gregory CLEMENT <redacted> --- Changes in v3: - Added tag "Tested-by" by Gregory arch/arm64/boot/dts/marvell/armada-3720-db.dts | 30 ++++++++++++++++++++++++++ 1 file changed, 30 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index 1372e9a6..0c4eb98 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts@@ -67,6 +67,36 @@ status = "okay"; }; +&spi0 { + status = "okay"; + + m25p80 at 0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <108000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition at 0 { + label = "bootloader"; + reg = <0x0 0x200000>; + }; + partition at 200000 { + label = "U-boot Env"; + reg = <0x200000 0x10000>; + }; + partition at 210000 { + label = "Linux"; + reg = <0x210000 0xDF0000>; + }; + }; + }; +}; + /* Exported on the micro USB connector CON32 through an FTDI */ &uart0 { status = "okay";
--
2.9.3