[1/4] pinctrl: dt-bindings: samsung: add drive strength macros for Exynos5433
From: jh80.chung@samsung.com (Jaehoon Chung)
Date: 2016-12-29 09:39:38
Also in:
linux-devicetree, linux-samsung-soc, lkml
On 12/29/2016 05:42 PM, Andi Shyti wrote:
quoted hunk ↗ jump to hunk
Commit 5db7e3bb87df ("pinctrl: dt-bindings: samsung: Add header with values used for configuration") has added a header file for defining the pinctrl values in order to avoid hardcoded settings in the Exynos DTS related files. Extend samsung.h to the Exynos5433 for drive strength values which are strictly related to the particular SoC and may defer from others. Signed-off-by: Andi Shyti <redacted> --- include/dt-bindings/pinctrl/samsung.h | 6 ++++++ 1 file changed, 6 insertions(+)diff --git a/include/dt-bindings/pinctrl/samsung.h b/include/dt-bindings/pinctrl/samsung.h index 6276eb785e2b..58868313d64b 100644 --- a/include/dt-bindings/pinctrl/samsung.h +++ b/include/dt-bindings/pinctrl/samsung.h@@ -45,6 +45,12 @@ #define EXYNOS5420_PIN_DRV_LV3 2 #define EXYNOS5420_PIN_DRV_LV4 3 +/* Drive strengths for Exynos5433 */ +#define EXYNOS5433_PIN_DRV_LV1 0 +#define EXYNOS5433_PIN_DRV_LV2 1 +#define EXYNOS5433_PIN_DRV_LV3 2 +#define EXYNOS5433_PIN_DRV_LV4 3
Well, i'm not sure..but you needs to compare the other Exynos5 series. it's difference bit Offset. Did you check it? I didn't check pinctrl file..if it doesn't apply any exynos5433 pinctrl for drv_strength. it will work wrong.. Best Regards, Jaehoon Chung
+ #define EXYNOS_PIN_FUNC_INPUT 0 #define EXYNOS_PIN_FUNC_OUTPUT 1 #define EXYNOS_PIN_FUNC_2 2