On Wed, Dec 14, 2016 at 06:12:36PM -0500, Sebastien Bourdelin wrote:

This watchdog is instantiated in a FPGA and can only be access using a
GPIOs bit-banged bus, called the NBUS by Technologic Systems.
The watchdog is made of only one register, called the feed register.
Writing to this register will re-arm the watchdog for a given time (and
enable it if it was disable). It can be disabled by writing a special
value into it.

Signed-off-by: Sebastien Bourdelin <redacted>
---
 .../devicetree/bindings/watchdog/ts4600-wdt.txt    |  16 ++
 arch/arm/boot/dts/imx28-ts4600-common.dtsi         |   5 +

Acked-by: Rob Herring <robh@kernel.org>

 drivers/watchdog/Kconfig                           |  10 +
 drivers/watchdog/Makefile                          |   1 +
 drivers/watchdog/ts4600_wdt.c                      | 213 +++++++++++++++++++++
 5 files changed, 245 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/watchdog/ts4600-wdt.txt
 create mode 100644 drivers/watchdog/ts4600_wdt.c