* Sebastian Reichel [off-list ref] [161214 05:32]:

Hi Pali & Pavel,

On Wed, Dec 14, 2016 at 01:53:23PM +0100, Pavel Machek wrote:

quoted

quoted

quoted

[  220.248596] tty ttyO1: Radio packet sent
[  220.249328] Bluetooth: hci0: Frame reassembly failed (-84)
[  220.272949] tty ttyO1: wakeup received: 1 -> 0
[  221.283477] tty ttyO1: radio packet timeout!
[  221.283630] enqueue: hu c304cc80 skb cd4a9b40
[  223.363372] Bluetooth: hci0 command 0xfc18 tx timeout
pavel at n900:~$

In log are still some failures, but ... is bluetooth working now?

I could scan for devices. The code is still racy, though. It's
most likely related to the newly introduced idle code. (Without
sending the BT module to correctly idle the bcm2048 does not
work correctly at all)

I was quite busy the last few weeks and did not manage to find
much time for kernel work. Now I will first have to catch up
with my power-supply tree.

quoted

It is... for Sebastian. I'm playing with camera now.

quoted

I see that you applied this patch: 
https://git.kernel.org/cgit/linux/kernel/git/pavel/linux-n900.git/commit/?id=051aa3fbf03ac770d8344690f5a936a7f04c6884

Looks like that pinmux is in DTS file incorrect. Can somebody verify it? 
Maybe Tony?

Yes, it is. Sebastian was pretty certain about that.

Yes, I'm certain. The bootloader enables the pullup resistors.
Note, that the wrong DTS entry is not in mainline. My bluetooth
branch has a fixed DTS patch instead of a fixup patch on top of
the broken one:

https://git.kernel.org/cgit/linux/kernel/git/sre/linux-n900.git/commit/?h=nokia-bluetooth-dev&id=6b63c111a979d100cfbdd76cb4a6bbadace35216

Maybe send it so we can merge it as a fix during the early -rc
cycle?

Regards,

Tony