On Wed, Dec 14, 2016 at 01:45:30PM +0100, Thomas Petazzoni wrote:

Hello,

On Tue, 13 Dec 2016 23:55:00 -0800, Jaghathiswari Rankappagounder
Natarajan wrote:

quoted

Documentation for the binding which provides an interface for adding clock,
data and clear signal GPIO lines to control seven segment display.

The platform device driver provides an API for displaying on two 7-segment
displays, and implements the required bit-banging. The hardware assumed is
74HC164 wired to two 7-segment displays.

The character device driver implements the user-space API for letting a user
write to two 7-segment displays including any conversion methods necessary
to map the user input to two 7-segment displays.

Adding clock, data and clear signal GPIO lines in the devicetree to control
seven segment display on zaius platform.

The platform driver matches on the device tree node; the platform driver also
initializes the character device.

Tested that the seven segment display works properly by writing to the
character device file on a EVB AST2500 board which also has 74HC164 wired
to two 7-segment displays.

FWIW, I proposed a driver for seven segment displays back in 2013:

   http://lists.infradead.org/pipermail/linux-arm-kernel/2013-January/139986.html

And the feedback from Greg KH was: we don't need a driver for that, do
it from userspace. See:

   http://lists.infradead.org/pipermail/linux-arm-kernel/2013-January/139992.html

So: good luck :-)

Did anyone ever write a library for this type of thing?

Again, I don't want to see one-off drivers for random devices like this
that should be able to all be controlled from userspace in a common
manner.  Much like we did for fingerprint readers a long long time
ago...

thanks,

greg k-h