[PATCH v7 1/8] Documentation: arm: define DT cpu capacity-dmips-mhz bindings
From: Lorenzo Pieralisi <hidden>
Date: 2016-12-12 12:38:48
Also in:
linux-devicetree, linux-pm, lkml
On Mon, Sep 05, 2016 at 03:22:45PM +0100, Juri Lelli wrote: [...]
quoted hunk ↗ jump to hunk
+=========================================== +5 - References +=========================================== + +[1] ARM Linux Kernel documentation - CPUs bindings + Documentation/devicetree/bindings/arm/cpus.txtdiff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index e6782d50cbcd..c1dcf4cade2e 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt@@ -241,6 +241,14 @@ nodes to be present and contain the properties described below. # List of phandles to idle state nodes supported by this cpu [3]. + - capacity-dmips-mhz + Usage: Optional + Value type: <u32> + Definition: + # u32 value representing CPU capacity [3] in + DMIPS/MHz, relative to highest capacity-dmips-mhz + in the system. + - rockchip,pmu Usage: optional for systems that have an "enable-method" property value of "rockchip,rk3066-smp"@@ -464,3 +472,5 @@ cpus { [2] arm/msm/qcom,kpss-acc.txt [3] ARM Linux kernel documentation - idle states bindings Documentation/devicetree/bindings/arm/idle-states.txt +[3] ARM Linux kernel documentation - cpu capacity bindings + Documentation/devicetree/bindings/arm/cpu-capacity.txt
Trivia: bumped into this while reviewing something else, too many threes, you will have to fix the added reference up. Thanks, Lorenzo