[PATCH 1/3] Add DT bindings documentation for NS2 USB DRD phy

This patch adds documentation for NS2 DRD Phy driver DT bindings

Signed-off-by: Raviteja Garimella <redacted>
---
 .../devicetree/bindings/phy/brcm,ns2-drd-phy.txt   | 40 ++++++++++++++++++++++
 1 file changed, 40 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt

diff --git a/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt b/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt
new file mode 100644
index 0000000..5857f99
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt

@@ -0,0 +1,40 @@
+BROADCOM NORTHSTAR2 USB2 (DUAL ROLE DEVICE) PHY
+
+Required properties:
+ - compatible: brcm,ns2-drd-phy
+ - reg: offset and length of the NS2 PHY related registers.
+ - reg-names
+   The below registers must be provided.
+   icfg - for DRD ICFG configurations
+   rst-ctrl - for DRD IDM reset
+   crmu-ctrl - for CRMU core vdd, PHY and PHY PLL reset
+   usb2-strap - for port over current polarity reversal
+ - #phy-cells: Must be 0. No args required.
+ - vbus-gpios: vbus gpio binding
+ - id-gpios: id gpio binding
+
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+Example:
+	gpio_g: gpio at 660a0000 {