[PATCH 2/8] dt-bindings: document the STM32 RTC bindings
From: Amelie DELAUNAY <hidden>
Date: 2016-12-05 10:16:39
Also in:
linux-devicetree, linux-rtc, lkml
From: Amelie DELAUNAY <hidden>
Date: 2016-12-05 10:16:39
Also in:
linux-devicetree, linux-rtc, lkml
Hi Alexandre, Thanks for reviewing On 12/05/2016 11:06 AM, Alexandre Belloni wrote:
Hi, On 02/12/2016 at 15:09:55 +0100, Amelie Delaunay wrote :quoted
This patch adds documentation of device tree bindings for the STM32 RTC. Signed-off-by: Amelie Delaunay <redacted> --- .../devicetree/bindings/rtc/st,stm32-rtc.txt | 31 ++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 Documentation/devicetree/bindings/rtc/st,stm32-rtc.txtdiff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt new file mode 100644 index 0000000..4578838 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt@@ -0,0 +1,31 @@ +STM32 Real Time Clock + +Required properties: +- compatible: "st,stm32-rtc". +- reg: address range of rtc register set. +- clocks: reference to the clock entry ck_rtc. +- clock-names: name of the clock used. Should be "ck_rtc".Is this name really useful?
You're right, not useful.
quoted
+- interrupt-parent: phandle for the interrupt controller. +- interrupts: rtc alarm interrupt. +- interrupt-names: rtc alarm interrupt name, should be "alarm".Same comment, is this name really useful?
Ditto.
Best regards, Amelie