[PATCH 2/3] ARM: dts: at91: sama5d2: move UART3 to DMA1
flat view
STALE3606d
From: Nicolas Ferre <hidden>
Date: 2016-12-01 10:50:37
Also in:
lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Now that DMA1 is defined, use it to distribute channel usage among the two controllers. Signed-off-by: Nicolas Ferre <redacted> --- arch/arm/boot/dts/sama5d2.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index c791ce9c750c..5b69eff523d9 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi@@ -1151,10 +1151,10 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xfc008000 0x100>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>; - dmas = <&dma0 + dmas = <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(41))>, - <&dma0 + <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(42))>; dma-names = "tx", "rx";
--
2.9.0