The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
are available in the git repository at:
http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.10/soc
for you to fetch changes up to 09f3510fb70a46c8921f2cf4a90dbcae460a6820:
ARM: BCM5301X: Add back handler ignoring external imprecise aborts (2016-11-16 12:39:05 -0800)
----------------------------------------------------------------
This pull request contains Broadcom ARM-based SoC changes for 4.10, please pull
the following:
- Rafal adds back the abort handler hook on BCM5301x which is required to silence
errors forwared from the PCIe controller that cannot be silenced at the PCIe RC level
----------------------------------------------------------------
Rafa? Mi?ecki (1):
ARM: BCM5301X: Add back handler ignoring external imprecise aborts
arch/arm/mach-bcm/bcm_5301x.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
are available in the git repository at:
http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.10/devicetree
for you to fetch changes up to 509f8342993be7ce2938edacec05b6e8d780c83e:
Merge tag 'bcm2835-dt-next-2016-11-18' into devicetree/next (2016-11-21 21:03:18 -0800)
----------------------------------------------------------------
This pull request contains Broadcom ARM-based SoC Device Tree changes for 4.10,
please pull the following:
- Rafal adds support for the Netgear R8500 routers, adds basic support
for the Tenda AC9 router which uses the new BCM53573 SoC (single core Cortex
A7). He also enables the UART on the Netgear R8000 and restructures the
include files a bit for the BCM47094 SoC, finally he adds USB 3.0 PHY nodes
which enables USB 3.0 on BCM5301X devices that support it. Finally he adds
support for the TP-LINK Archer C9 V1 router.
- Kamal adds support for the QSPI controller on the Northstar Plus SoCs and updates
the bcm958625k reference board to have it enabled
- Dan adds support for the Luxul XAP-1510 (using a BCM4708) and XWR-3100 (using
a BCM47094)
- Scott fixes the pinctrl names in the Cygnus DTS files
- Jonathan enables the Broadcom iProc mailbox controller for Broadcom Cygnus/iProc
SoCs, he adds interrupt support for the GPIO CRMU hardware block and finally adds
the node for the OTP controller found on Cygnus SoCs
- Dhananjay enables the GPIO B controller on Norstarh Plus SoCs
- Eric defines standard pinctrl groups in the BCM2835 GPIO node
- Gerd adds definitions for the pinctrl groups and updates the PWM, I2C and SDHCI nodes
to use their appropriate pinctrl functions
- Linus adds names for the Raspberry Pi GPIO lines based on the datasheet
- Martin adds the DT binding and nodes for the Raspberry Pi firmware thermal block
- Stefan fixes a few typos with respect to the BCM2835 mailbox binding example and
Device Tree nodes he also fixes the Raspberry Pi GPIO lines names and finally
adds names for the Raspberry Zero GPIO lines
----------------------------------------------------------------
Dan Haab (2):
ARM: BCM5301X: Add DT for Luxul XAP-1510
ARM: BCM5301X: Add DT for Luxul XWR-3100
Eric Anholt (1):
ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.
Florian Fainelli (1):
Merge tag 'bcm2835-dt-next-2016-11-18' into devicetree/next
Gerd Hoffmann (6):
pinctrl: bcm2835: add pull defines to dt bindings
ARM: dts: bcm283x: add pinctrl group to &pwm, drop pins from &gpio
ARM: dts: bcm283x: add pinctrl group to &i2c0, drop pins from &gpio
ARM: dts: bcm283x: add pinctrl group to &i2c1, drop pins from &gpio
ARM: dts: bcm283x: add pinctrl group to &sdhci, drop pins from &gpio
ARM: dts: bcm283x: drop alt3 from &gpio
Jonathan Richardson (3):
ARM: dts: Enable Broadcom iProc mailbox controller
ARM: dts: Enable interrupt support for cygnus crmu gpio driver
ARM: dts: Add node for Broadcom OTP controller driver
Kamal Dasu (1):
ARM: dts: NSP: Add QSPI nodes to NSPI and bcm958625k DTSes
Linus Walleij (1):
ARM: bcm2835: Add names for the Raspberry Pi GPIO lines
Martin Sperl (2):
dt: bindings: add thermal device driver for bcm2835
ARM: bcm2835: dts: add thermal node to device-tree of bcm283x
Rafa? Mi?ecki (7):
ARM: BCM5301X: Add DT for Netgear R8500
ARM: BCM5301X: Add basic dts for BCM53573 based Tenda AC9
ARM: BCM5301X: Add separated DTS include file for BCM47094
ARM: BCM5301X: Enable UART on Netgear R8000
ARM: BCM5301X: Specify USB 3.0 PHY in DT
ARM: BCM53573: Specify PMU and its ILP clock in the DT
ARM: BCM5301X: Add DT for TP-LINK Archer C9 V1
Scott Branden (1):
ARM: dts: cygnus: fix naming of pinctrl node
Stefan Wahren (4):
DT: binding: bcm2835-mbox: fix address typo in example
ARM: dts: bcm283x: fix typo in mailbox address
ARM: bcm2835: Fix names for the Raspberry Pi GPIO lines
ARM: bcm2835: Add names for the RPi Zero GPIO lines
Yendapally Reddy Dhananjaya Reddy (1):
ARM: dts: enable GPIO-b for Broadcom NSP
.../bindings/mailbox/brcm,bcm2835-mbox.txt | 2 +-
.../bindings/thermal/brcm,bcm2835-thermal.txt | 17 ++
arch/arm/boot/dts/Makefile | 6 +
arch/arm/boot/dts/bcm-cygnus.dtsi | 21 +-
arch/arm/boot/dts/bcm-nsp.dtsi | 41 +++-
arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 67 ++++++-
arch/arm/boot/dts/bcm2835-rpi-a.dts | 69 ++++++-
arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 68 ++++++-
arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 68 ++++++-
arch/arm/boot/dts/bcm2835-rpi-b.dts | 69 ++++++-
arch/arm/boot/dts/bcm2835-rpi-zero.dts | 67 ++++++-
arch/arm/boot/dts/bcm2835-rpi.dtsi | 15 +-
arch/arm/boot/dts/bcm2835.dtsi | 6 +
arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 2 +-
arch/arm/boot/dts/bcm2836.dtsi | 6 +
arch/arm/boot/dts/bcm283x.dtsi | 212 ++++++++++++++++++++-
arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 64 +++++++
arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 2 +-
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 2 +-
arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 2 +-
arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 6 +-
arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 114 +++++++++++
arch/arm/boot/dts/bcm4709.dtsi | 11 ++
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 3 +-
arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 111 +++++++++++
arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 103 ++++++++++
arch/arm/boot/dts/bcm47094.dtsi | 17 ++
arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 74 +++++++
arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi | 13 ++
arch/arm/boot/dts/bcm5301x.dtsi | 7 +
arch/arm/boot/dts/bcm53573.dtsi | 159 ++++++++++++++++
arch/arm/boot/dts/bcm958625k.dts | 34 ++++
drivers/pinctrl/bcm/pinctrl-bcm2835.c | 6 -
include/dt-bindings/pinctrl/bcm2835.h | 5 +
34 files changed, 1440 insertions(+), 29 deletions(-)
create mode 100644 Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt
create mode 100644 arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
create mode 100644 arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
create mode 100644 arch/arm/boot/dts/bcm4709.dtsi
create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
create mode 100644 arch/arm/boot/dts/bcm47094-netgear-r8500.dts
create mode 100644 arch/arm/boot/dts/bcm47094.dtsi
create mode 100644 arch/arm/boot/dts/bcm47189-tenda-ac9.dts
create mode 100644 arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
create mode 100644 arch/arm/boot/dts/bcm53573.dtsi
On Monday, November 21, 2016 9:48:20 PM CET Florian Fainelli wrote:
This pull request contains Broadcom ARM-based SoC Device Tree changes for 4.10,
please pull the following:
- Rafal adds support for the Netgear R8500 routers, adds basic support
for the Tenda AC9 router which uses the new BCM53573 SoC (single core Cortex
A7). He also enables the UART on the Netgear R8000 and restructures the
include files a bit for the BCM47094 SoC, finally he adds USB 3.0 PHY nodes
which enables USB 3.0 on BCM5301X devices that support it. Finally he adds
support for the TP-LINK Archer C9 V1 router.
- Kamal adds support for the QSPI controller on the Northstar Plus SoCs and updates
the bcm958625k reference board to have it enabled
- Dan adds support for the Luxul XAP-1510 (using a BCM4708) and XWR-3100 (using
a BCM47094)
- Scott fixes the pinctrl names in the Cygnus DTS files
- Jonathan enables the Broadcom iProc mailbox controller for Broadcom Cygnus/iProc
SoCs, he adds interrupt support for the GPIO CRMU hardware block and finally adds
the node for the OTP controller found on Cygnus SoCs
- Dhananjay enables the GPIO B controller on Norstarh Plus SoCs
- Eric defines standard pinctrl groups in the BCM2835 GPIO node
- Gerd adds definitions for the pinctrl groups and updates the PWM, I2C and SDHCI nodes
to use their appropriate pinctrl functions
- Linus adds names for the Raspberry Pi GPIO lines based on the datasheet
- Martin adds the DT binding and nodes for the Raspberry Pi firmware thermal block
- Stefan fixes a few typos with respect to the BCM2835 mailbox binding example and
Device Tree nodes he also fixes the Raspberry Pi GPIO lines names and finally
adds names for the Raspberry Zero GPIO lines
One follow-up: as this was a relatively big branch, it would have
been nice to get parts of it a little earlier. I see that the
raspberry-pi changes make up about half of it and came fairly
late, but the rest apparently was ready much earlier.
If you have the choice between waiting a little longer to
send all the changes at once, and sending off a good chunk
a little earlier, better send multiple sets of pull requests.
Arnd
One follow-up: as this was a relatively big branch, it would have
been nice to get parts of it a little earlier. I see that the
raspberry-pi changes make up about half of it and came fairly
late, but the rest apparently was ready much earlier.
If you have the choice between waiting a little longer to
send all the changes at once, and sending off a good chunk
a little earlier, better send multiple sets of pull requests.
I was trying to minimize the number of pull requests for you to pull,
but what you are saying makes perfect sense and helps on many aspects.
Thanks a lot for your feedback!
--
Florian
The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
are available in the git repository at:
http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.10/devicetree-arm64
for you to fetch changes up to e687607116bc45afcbbcd0097129573f9729ff21:
Merge tag 'bcm2835-dt-64-next-2016-11-18' into devicetree-arm64/next (2016-11-21 21:09:19 -0800)
----------------------------------------------------------------
This pull request contains Broadcom ARM64 based SoC Device Tree changes for
4.10, please pull the following:
- Robin updates the Northstart 2 DTS to use the generic IOMMU binding
- Scott renames the Broadcom Northstar 2 binding document to use a standard name
including the brcm vendor prefix
- Kamal adds the QSPI Device Tree node to the Northstar 2 SoC and updates the
Northstar 2 SVK reference board DTS file with it enabled.
- Rob adds the Device Tree node for the Broadcom PDC (mailbox) hardware to the
Northstar 2 SoC
- Jon enables the SDIO1 block and adds proper PCIe PHYs Device Tree nodes to the
Northstar 2 SoC
- Ray adds required properties NAND controller properties to make NAND work on
the Northstar 2 SVK board, this was submitted as a 4.9 fixes and is included
here to resolve DTS file merges
- Andrea removes an incorrect power LED from the Raspberry Pi 3 DTS
- Andreas fixes the compatible string for the BCM2837 (Raspberry Pi 3)
- Eric defines standard pinctrl groups in the BCM2835 GPIO node
- Gerd adds definitions for the pinctrl groups and updates the PWM, I2C and SDHCI nodes
to use their appropriate pinctrl functions
- Linus adds names for the Raspberry Pi GPIO lines based on the datasheet
- Martin adds the DT binding and nodes for the Raspberry Pi firmware thermal block
- Stefan fixes a few typos with respect to the BCM2835 mailbox binding example and
Device Tree nodes he also uses the proper DTSI file to define the USB host mode
for the USB Device Tree nodes
----------------------------------------------------------------
Andrea Merello (1):
ARM64: dts: bcm2837-rpi-3-b: remove incorrect pwr LED
Andreas F?rber (1):
ARM64: dts: bcm2835: Fix bcm2837 compatible string
Eric Anholt (2):
ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.
Merge branch 'bcm2835-dt-next' into bcm2835-dt-64-next
Florian Fainelli (1):
Merge tag 'bcm2835-dt-64-next-2016-11-18' into devicetree-arm64/next
Gerd Hoffmann (6):
pinctrl: bcm2835: add pull defines to dt bindings
ARM: dts: bcm283x: add pinctrl group to &pwm, drop pins from &gpio
ARM: dts: bcm283x: add pinctrl group to &i2c0, drop pins from &gpio
ARM: dts: bcm283x: add pinctrl group to &i2c1, drop pins from &gpio
ARM: dts: bcm283x: add pinctrl group to &sdhci, drop pins from &gpio
ARM: dts: bcm283x: drop alt3 from &gpio
Jon Mason (2):
arm64: dts: NS2: enable sdio1
arm64: dts: NS2: Add PCI PHYs
Kamal Dasu (1):
ARM64: dts: Add QSPI Device Tree node for NS2
Linus Walleij (1):
ARM: bcm2835: Add names for the Raspberry Pi GPIO lines
Martin Sperl (3):
dt: bindings: add thermal device driver for bcm2835
ARM: bcm2835: dts: add thermal node to device-tree of bcm283x
ARM64: bcm2835: dts: add thermal node to device-tree of bcm2837
Ray Jui (1):
arm64: dts: Updated NAND DT properties for NS2 SVK
Rob Rice (1):
arm64: dts: Add Broadcom Northstar2 device tree entries for PDC driver.
Robin Murphy (1):
arm64: dts: Update Broadcom NS2 to generic IOMMU binding
Scott Branden (1):
arm64: dts: rename ns2.txt to brcm,ns2.txt
Stefan Wahren (3):
ARM64: dts: bcm283x: Use dtsi for USB host mode
DT: binding: bcm2835-mbox: fix address typo in example
ARM: dts: bcm283x: fix typo in mailbox address
.../bindings/arm/bcm/{ns2.txt => brcm,ns2.txt} | 0
.../bindings/mailbox/brcm,bcm2835-mbox.txt | 2 +-
.../bindings/thermal/brcm,bcm2835-thermal.txt | 17 ++
arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 67 ++++++-
arch/arm/boot/dts/bcm2835-rpi-a.dts | 69 ++++++-
arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 68 ++++++-
arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 68 ++++++-
arch/arm/boot/dts/bcm2835-rpi-b.dts | 69 ++++++-
arch/arm/boot/dts/bcm2835-rpi-zero.dts | 2 +-
arch/arm/boot/dts/bcm2835-rpi.dtsi | 15 +-
arch/arm/boot/dts/bcm2835.dtsi | 6 +
arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 2 +-
arch/arm/boot/dts/bcm2836.dtsi | 6 +
arch/arm/boot/dts/bcm283x.dtsi | 212 ++++++++++++++++++++-
arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts | 8 +-
arch/arm64/boot/dts/broadcom/bcm2837.dtsi | 8 +-
.../boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi | 1 +
arch/arm64/boot/dts/broadcom/ns2-svk.dts | 40 ++++
arch/arm64/boot/dts/broadcom/ns2.dtsi | 62 +++++-
drivers/pinctrl/bcm/pinctrl-bcm2835.c | 6 -
include/dt-bindings/pinctrl/bcm2835.h | 5 +
21 files changed, 703 insertions(+), 30 deletions(-)
rename Documentation/devicetree/bindings/arm/bcm/{ns2.txt => brcm,ns2.txt} (100%)
create mode 100644 Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt
create mode 120000 arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi
On Monday, November 21, 2016 9:48:21 PM CET Florian Fainelli wrote:
This pull request contains Broadcom ARM64 based SoC Device Tree changes for
4.10, please pull the following:
- Robin updates the Northstart 2 DTS to use the generic IOMMU binding
- Scott renames the Broadcom Northstar 2 binding document to use a standard name
including the brcm vendor prefix
- Kamal adds the QSPI Device Tree node to the Northstar 2 SoC and updates the
Northstar 2 SVK reference board DTS file with it enabled.
- Rob adds the Device Tree node for the Broadcom PDC (mailbox) hardware to the
Northstar 2 SoC
- Jon enables the SDIO1 block and adds proper PCIe PHYs Device Tree nodes to the
Northstar 2 SoC
- Ray adds required properties NAND controller properties to make NAND work on
the Northstar 2 SVK board, this was submitted as a 4.9 fixes and is included
here to resolve DTS file merges
- Andrea removes an incorrect power LED from the Raspberry Pi 3 DTS
- Andreas fixes the compatible string for the BCM2837 (Raspberry Pi 3)
- Eric defines standard pinctrl groups in the BCM2835 GPIO node
- Gerd adds definitions for the pinctrl groups and updates the PWM, I2C and SDHCI nodes
to use their appropriate pinctrl functions
- Linus adds names for the Raspberry Pi GPIO lines based on the datasheet
- Martin adds the DT binding and nodes for the Raspberry Pi firmware thermal block
- Stefan fixes a few typos with respect to the BCM2835 mailbox binding example and
Device Tree nodes he also uses the proper DTSI file to define the USB host mode
for the USB Device Tree nodes
The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
are available in the git repository at:
http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.10/maintainers-arm64
for you to fetch changes up to 3483b163d2ac14c6e35d201b9db7dde70841a199:
MAINTAINERS: Update Broadcom Vulcan maintainer email (2016-11-05 17:25:55 -0700)
----------------------------------------------------------------
This pull request contains MAINTAINERS file updates for Broadcom ARM64 entries,
please pull:
- Jayachandran updates his email address for the Broadcom Vulcan entry
----------------------------------------------------------------
Jayachandran C (1):
MAINTAINERS: Update Broadcom Vulcan maintainer email
MAINTAINERS | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
On Monday, November 21, 2016 9:48:22 PM CET Florian Fainelli wrote:
This pull request contains MAINTAINERS file updates for Broadcom ARM64 entries,
please pull:
- Jayachandran updates his email address for the Broadcom Vulcan entry
The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
are available in the git repository at:
http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.10/defconfig
for you to fetch changes up to 33c037c51be5df857ae563f7fc551dc6e746d9de:
Merge tag 'bcm2835-defconfig-next-2016-11-18' into defconfig/next (2016-11-21 21:20:15 -0800)
----------------------------------------------------------------
This pull request contains Broadcom ARM-based defconfig changes for 4.10, please
pull the following:
- Florian updates the multi_v7_defconfig with the relevant basic drivers needed
for the Broadcom BCM5301x (Northstar) SoCs to reboot, have PCIe, and Ethernet
- Martin enables the Raspberry Pi thermal driver in bcm2835_defconfig
----------------------------------------------------------------
Florian Fainelli (2):
ARM: multi_v7_defconfig: Enable BCM47xx/BCM5301x drivers
Merge tag 'bcm2835-defconfig-next-2016-11-18' into defconfig/next
Martin Sperl (1):
ARM: bcm2835: add thermal driver to default config
arch/arm/configs/bcm2835_defconfig | 2 ++
arch/arm/configs/multi_v7_defconfig | 13 +++++++++++++
2 files changed, 15 insertions(+)
On Monday, November 21, 2016 9:48:23 PM CET Florian Fainelli wrote:
This pull request contains Broadcom ARM-based defconfig changes for 4.10, please
pull the following:
- Florian updates the multi_v7_defconfig with the relevant basic drivers needed
for the Broadcom BCM5301x (Northstar) SoCs to reboot, have PCIe, and Ethernet
- Martin enables the Raspberry Pi thermal driver in bcm2835_defconfig
The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
are available in the git repository at:
http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.10/defconfig-arm64
for you to fetch changes up to 9efacfc80902c6ddf538a2f396e0112c1f6d1e23:
Merge tag 'bcm2835-defconfig-64-next-2016-11-18' into defconfig-arm64/next (2016-11-21 21:22:55 -0800)
----------------------------------------------------------------
This pull request contains Broadcom ARM64-based SoCs defconfig changes for 4.10,
please pull the following changes:
- Eric updates the ARMv8 defconfig to contain everything that is needed to run
a 64-bit kernel on the Raspberry Pi 3
- Scott enables the standard AT25 EEPROM driver as module for the ARM64 defconfig
- Martin enables the Raspberry Pi Thermal driver in the ARM64 defconfig
----------------------------------------------------------------
Eric Anholt (1):
arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig
Florian Fainelli (2):
Merge tag 'bcm2835-defconfig-64-next-2016-09-22' into defconfig-arm64/next
Merge tag 'bcm2835-defconfig-64-next-2016-11-18' into defconfig-arm64/next
Martin Sperl (1):
ARM64: bcm2835: add thermal driver to default config
Scott Branden (1):
arm64: defconfig: enable EEPROM_AT25 config option
arch/arm64/configs/defconfig | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
On Monday, November 21, 2016 9:48:24 PM CET Florian Fainelli wrote:
This pull request contains Broadcom ARM64-based SoCs defconfig changes for 4.10,
please pull the following changes:
- Eric updates the ARMv8 defconfig to contain everything that is needed to run
a 64-bit kernel on the Raspberry Pi 3
- Scott enables the standard AT25 EEPROM driver as module for the ARM64 defconfig
- Martin enables the Raspberry Pi Thermal driver in the ARM64 defconfig
On Monday, November 21, 2016 9:48:19 PM CET Florian Fainelli wrote:
This pull request contains Broadcom ARM-based SoC changes for 4.10, please pull
the following:
- Rafal adds back the abort handler hook on BCM5301x which is required to silence
errors forwared from the PCIe controller that cannot be silenced at the PCIe RC level
Pulled into next/soc.
It's unclear to me whether we want this to be backported to stable kernels,
can you clarify?
Thanks,
Arnd
On Monday, November 21, 2016 9:48:19 PM CET Florian Fainelli wrote:
quoted
This pull request contains Broadcom ARM-based SoC changes for 4.10,
please pull
the following:
- Rafal adds back the abort handler hook on BCM5301x which is required
to silence
errors forwared from the PCIe controller that cannot be silenced at
the PCIe RC level
Pulled into next/soc.
It's unclear to me whether we want this to be backported to stable
kernels,
can you clarify?
It took me/us so much time to get an agreement on this patch I totally
forgot
about backporting it to stable.
To be clear it indeed fixes a regression. Commit 937b12306ea79 ("ARM:
BCM5301X:
remove workaround imprecise abort fault handler") went into 4.5, so this
one
could be backported to 4.5+.
As this has been already pulled, I think I'll wait for it to appear in
Linus's
tree and just e-mail stable guys manually (unless someone objects).
Thanks for
bringing my attention to this.
On Thursday, December 1, 2016 12:18:26 PM CET Rafa? Mi?ecki wrote:
On 2016-11-30 17:52, Arnd Bergmann wrote:
quoted
On Monday, November 21, 2016 9:48:19 PM CET Florian Fainelli wrote:
quoted
This pull request contains Broadcom ARM-based SoC changes for 4.10,
please pull
the following:
- Rafal adds back the abort handler hook on BCM5301x which is required
to silence
errors forwared from the PCIe controller that cannot be silenced at
the PCIe RC level
Pulled into next/soc.
It's unclear to me whether we want this to be backported to stable
kernels,
can you clarify?
It took me/us so much time to get an agreement on this patch I totally
forgot
about backporting it to stable.
To be clear it indeed fixes a regression. Commit 937b12306ea79 ("ARM:
BCM5301X:
remove workaround imprecise abort fault handler") went into 4.5, so this
one
could be backported to 4.5+.
As this has been already pulled, I think I'll wait for it to appear in
Linus's
tree and just e-mail stable guys manually (unless someone objects).
Thanks for
bringing my attention to this.