[PATCH 5/5] ARM64: dts: meson-gx-p23x-q20x: enable USB on P23x and Q20x boards
From: martin.blumenstingl@googlemail.com (Martin Blumenstingl)
Date: 2016-11-26 14:56:35
Also in:
linux-amlogic, linux-devicetree
Subsystem:
arm/amlogic meson soc support, the rest · Maintainers:
Neil Armstrong, Kevin Hilman, Linus Torvalds
All four devices are only using the dwc3 controller. The actual ports are provided by dwc3's internal USB hub. The implementation on P230, P231 and Q201 seems identical: the USB VBUS supply seems to be hard-wired, while on Q200 the USB VBUS is provided by GPIOAO_5. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> --- arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 12 ++++++++++++ arch/arm64/boot/dts/amlogic/meson-gxm-s912-q200.dts | 17 +++++++++++++++++ 2 files changed, 29 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
index 7a078be..360c91d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi@@ -188,3 +188,15 @@ ðmac { status = "okay"; }; + +&usb2_phys { + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-s912-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-s912-q200.dts
index 5dbc660..6c28e87 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-s912-q200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-s912-q200.dts@@ -49,6 +49,19 @@ / { compatible = "amlogic,q200", "amlogic,s912", "amlogic,meson-gxm"; model = "Amlogic Meson GXM (S912) Q200 Development Board"; + + usb_pwr: regulator-usb-pwrs { + compatible = "regulator-fixed"; + + regulator-name = "USB_PWR"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + /* signal name in schematic: USB_PWR_EN */ + gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; /* Q200 has exclusive choice between internal or external PHY */
@@ -75,3 +88,7 @@ max-speed = <1000>; }; }; + +&usb3_phy0 { + phy-supply = <&usb_pwr>; +};
--
2.10.2