[RFC 4/6] ARM: dts: dra7: add entry for bb2d module
From: l.stach@pengutronix.de (Lucas Stach)
Date: 2016-11-18 10:59:01
Also in:
linux-devicetree, linux-omap
Am Donnerstag, den 17.11.2016, 20:44 -0600 schrieb Robert Nelson:
quoted hunk
From: Gowtham Tammana <redacted> BB2D entry is added to the dts file. Crossbar index number is used for interrupt mapping. Signed-off-by: Gowtham Tammana <redacted> Signed-off-by: Tomi Valkeinen <redacted> --- arch/arm/boot/dts/dra7.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index addb753..43488b6 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi@@ -959,6 +959,16 @@ ti,hwmods = "dmm"; }; + bb2d: bb2d at 59000000 { + compatible = "ti,dra7-bb2d"; + reg = <0x59000000 0x0700>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "bb2d"; + clocks = <&dpll_core_h24x2_ck>; + clock-names = "fclk";
"fclk" is not an accepted clock name for the etnaviv driver. It supports up to 3 clocks: "bus", "core" and "shader". If there is only one clock required in your design it would probably be the "core" clock. Regards, Lucas