[PATCH v2] input: touchscreen: silead: Add regulator support

On Wed, Nov 16, 2016 at 07:58:26PM +0100, Hans de Goede wrote:

HI,

On 16-11-16 18:51, Dmitry Torokhov wrote:

quoted

On Wed, Nov 16, 2016 at 12:55:07PM +0100, Hans de Goede wrote:

quoted

On some tablets the touchscreen controller is powered by separate
regulators, add support for this.

Signed-off-by: Hans de Goede <redacted>
Acked-by: Rob Herring <robh@kernel.org>
---
Changes in v2:
-Use devm_regulator_bulk_get() and friends
-Use devm_add_action_or_reset() to disable the regulator
---
.../bindings/input/touchscreen/silead_gsl1680.txt  |  2 ++
drivers/input/touchscreen/silead.c                 | 29 ++++++++++++++++++++++
2 files changed, 31 insertions(+)

diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
index e844c3f..b726823 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt

@@ -22,6 +22,8 @@ Optional properties:
- touchscreen-inverted-y  : See touchscreen.txt
- touchscreen-swapped-x-y : See touchscreen.txt
- silead,max-fingers	  : maximum number of fingers the touchscreen can detect
+- vddio-supply		  : regulator phandle for controller VDDIO
+- avdd-supply		  : regulator phandle for controller AVDD

Example:

diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c
index f502c84..404830a 100644
--- a/drivers/input/touchscreen/silead.c
+++ b/drivers/input/touchscreen/silead.c

@@ -29,6 +29,7 @@

#include <linux/input/touchscreen.h>
#include <linux/pm.h>
#include <linux/irq.h>
+#include <linux/regulator/consumer.h>

#include <asm/unaligned.h>

@@ -73,6 +74,7 @@ struct silead_ts_data {

	struct i2c_client *client;
	struct gpio_desc *gpio_power;
	struct input_dev *input;
+	struct regulator_bulk_data regulators[2];
	char fw_name[64];
	struct touchscreen_properties prop;
	u32 max_fingers;

@@ -433,6 +435,13 @@ static int silead_ts_set_default_fw_name(struct silead_ts_data *data,

}
#endif

+static void silead_disable_regulator(void *arg)
+{
+	struct silead_ts_data *data = arg;
+
+	regulator_bulk_disable(ARRAY_SIZE(data->regulators), data->regulators);
+}
+
static int silead_ts_probe(struct i2c_client *client,
			   const struct i2c_device_id *id)
{

@@ -465,6 +474,26 @@ static int silead_ts_probe(struct i2c_client *client,

	if (client->irq <= 0)
		return -ENODEV;

+	data->regulators[0].supply = "vddio";
+	data->regulators[1].supply = "avdd";
+	error = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->regulators),
+					data->regulators);
+	if (error)
+		return error;
+
+	/*
+	 * Enable regulators at probe and disable them at remove, we need
+	 * to keep the chip powered otherwise it forgets its firmware.
+	 */

Hmm, this burns power though. Why can't we reload firmware on resume (it
should be already cached)?

We already put the device in low-power mode using the power pin. Of the
20 or so different tablets I've with this touchscreen controller only
2 actually have a separate regulator for the controller, so I do not
believe that powering down the regulator will be a big win, otherwise
all tablets would have had this.

quoted

Does it take too long?

It is a couple of kB written one 32-bit word at a time over i2c, so
it's not fast.

OK, fair enough. Applied, thank you.

-- 
Dmitry