[PATCH 3/6] clk: Add driver for Maxim-8997 PMIC clocks

Hi Javier,

On 7 November 2016 at 20:31, Javier Martinez Canillas
[off-list ref] wrote:

Hello Pankaj,

On 11/07/2016 07:09 AM, Pankaj Dubey wrote:

quoted

The MAX8997 PMIC has 32.786kHz crystal oscillator which provides an
accurate low frequency clock for MAX8997 internal circuit as well as
external circuit. This patch adds support for these two clocks.

CC: Michael Turquette <mturquette@baylibre.com>
CC: Rob Herring <robh+dt@kernel.org>
CC: devicetree at vger.kernel.org
CC: linux-clk at vger.kernel.org
Signed-off-by: Pankaj Dubey <redacted>
---

What kernel version are you basing this on? The Maxim common clock code

This patch series, I have prepared on Krzysztof's for-next which is 4.9-rc1,

is going away for v4.9 and instead the clk-max77686 driver supports both
77686 and 77802 clocks. See commit 8ad313fe4e00 ("clk: max77686: Combine
Maxim max77686 and max77802 driver").

Since the 8997 clock IP looks very similar to 77802 AFAICT, you should
also extend the clk-max77686 driver to have 8997 support.

I was not aware of this change. I will check this and if I can
reuse/extend max77686 for 8997 I will do it.

Thanks,
Pankaj Dubey

Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel