[PATCH] ata: xgene: Enable NCQ support for APM X-Gene SATA controller hardware v1.1
From: Rameshwar Sahu <hidden>
Date: 2016-11-09 11:39:14
Also in:
linux-devicetree, linux-ide, linux-scsi
Hi Olof/Tejun, On Thu, Oct 20, 2016 at 4:44 PM, Rameshwar Prasad Sahu [off-list ref] wrote:
quoted hunk ↗ jump to hunk
This patch enables NCQ support for APM X-Gene SATA controller hardware v1.1 that was broken with hardware v1.0. Signed-off-by: Rameshwar Prasad Sahu <redacted> --- drivers/ata/ahci_xgene.c | 14 ++++++++------ 1 files changed, 8 insertions(+), 6 deletions(-)diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c index 73b19b2..8b88be9 100644 --- a/drivers/ata/ahci_xgene.c +++ b/drivers/ata/ahci_xgene.c@@ -87,6 +87,7 @@ enum xgene_ahci_version { XGENE_AHCI_V1 = 1, + XGENE_AHCI_V1_1, XGENE_AHCI_V2, };@@ -734,6 +735,7 @@ static struct scsi_host_template ahci_platform_sht = { #ifdef CONFIG_ACPI static const struct acpi_device_id xgene_ahci_acpi_match[] = { { "APMC0D0D", XGENE_AHCI_V1}, + { "APMC0D67", XGENE_AHCI_V1_1}, { "APMC0D32", XGENE_AHCI_V2}, {}, };@@ -742,6 +744,7 @@ MODULE_DEVICE_TABLE(acpi, xgene_ahci_acpi_match); static const struct of_device_id xgene_ahci_of_match[] = { {.compatible = "apm,xgene-ahci", .data = (void *) XGENE_AHCI_V1}, + {.compatible = "apm,xgene-ahci-v1-1", .data = (void *) XGENE_AHCI_V1_1}, {.compatible = "apm,xgene-ahci-v2", .data = (void *) XGENE_AHCI_V2}, {}, };@@ -755,8 +758,7 @@ static int xgene_ahci_probe(struct platform_device *pdev) struct resource *res; const struct of_device_id *of_devid; enum xgene_ahci_version version = XGENE_AHCI_V1; - const struct ata_port_info *ppi[] = { &xgene_ahci_v1_port_info, - &xgene_ahci_v2_port_info }; + const struct ata_port_info *ppi; int rc; hpriv = ahci_platform_get_resources(pdev);@@ -821,8 +823,6 @@ static int xgene_ahci_probe(struct platform_device *pdev) dev_warn(&pdev->dev, "%s: Error reading device info. Assume version1\n", __func__); version = XGENE_AHCI_V1; - } else if (info->valid & ACPI_VALID_CID) { - version = XGENE_AHCI_V2; } } }@@ -858,18 +858,20 @@ skip_clk_phy: switch (version) { case XGENE_AHCI_V1: + ppi = &xgene_ahci_v1_port_info; hpriv->flags = AHCI_HFLAG_NO_NCQ; break; case XGENE_AHCI_V2: + ppi = &xgene_ahci_v2_port_info; hpriv->flags |= AHCI_HFLAG_YES_FBS; hpriv->irq_handler = xgene_ahci_irq_intr; break; default: + ppi = &xgene_ahci_v1_port_info; break; } - rc = ahci_platform_init_host(pdev, hpriv, ppi[version - 1], - &ahci_platform_sht); + rc = ahci_platform_init_host(pdev, hpriv, ppi, &ahci_platform_sht); if (rc) goto disable_resources; --1.7.1
Any comment on above patch ??