Thread (17 messages) 17 messages, 3 authors, 2016-12-01

[PATCH v5 net-next 7/7] ARM64: dts: marvell: Add network support for Armada 3700

From: Gregory CLEMENT <hidden>
Date: 2016-11-30 21:43:20
Also in: lkml, netdev
Subsystem: arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, the rest · Maintainers: Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Linus Torvalds

Add neta nodes for network support both in device tree for the SoC and
the board.

Signed-off-by: Gregory CLEMENT <redacted>
---
 arch/arm64/boot/dts/marvell/armada-3720-db.dts | 23 +++++++++++++++++++-
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi   | 23 +++++++++++++++++++-
 2 files changed, 46 insertions(+), 0 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index 1372e9a6aaa4..c8b82e4145de 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -81,3 +81,26 @@
 &pcie0 {
 	status = "okay";
 };
+
+&mdio {
+	status = "okay";
+	phy0: ethernet-phy at 0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy at 1 {
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	phy-mode = "rgmii-id";
+	phy = <&phy0>;
+	status = "okay";
+};
+
+&eth1 {
+	phy-mode = "rgmii-id";
+	phy = <&phy1>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index e9bd58793464..3b8eb45bdc76 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -140,6 +140,29 @@
 				};
 			};
 
+			eth0: ethernet at 30000 {
+				   compatible = "marvell,armada-3700-neta";
+				   reg = <0x30000 0x4000>;
+				   interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				   clocks = <&sb_periph_clk 8>;
+				   status = "disabled";
+			};
+
+			mdio: mdio at 32004 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0x32004 0x4>;
+			};
+
+			eth1: ethernet at 40000 {
+				compatible = "marvell,armada-3700-neta";
+				reg = <0x40000 0x4000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sb_periph_clk 7>;
+				status = "disabled";
+			};
+
 			usb3: usb at 58000 {
 				compatible = "marvell,armada3700-xhci",
 				"generic-xhci";
-- 
git-series 0.8.10
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help