[PATCH 10/12] usb: phy: qcom-8x16-usb: Replace the extcon API
From: cw00.choi@samsung.com (Chanwoo Choi)
Date: 2016-11-30 06:00:21
Also in:
linux-omap, linux-pm, linux-renesas-soc, lkml
Subsystem:
the rest, usb subsystem · Maintainers:
Linus Torvalds, Greg Kroah-Hartman
This patch uses the resource-managed extcon API for extcon_register_notifier() and replaces the deprecated extcon API as following: - extcon_get_cable_state_() -> extcon_get_state() Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> --- drivers/usb/phy/phy-qcom-8x16-usb.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/phy/phy-qcom-8x16-usb.c b/drivers/usb/phy/phy-qcom-8x16-usb.c
index d8593adb3621..fdf686398772 100644
--- a/drivers/usb/phy/phy-qcom-8x16-usb.c
+++ b/drivers/usb/phy/phy-qcom-8x16-usb.c@@ -187,7 +187,7 @@ static int phy_8x16_init(struct usb_phy *phy) val = ULPI_PWR_OTG_COMP_DISABLE; usb_phy_io_write(phy, val, ULPI_SET(ULPI_PWR_CLK_MNG_REG)); - state = extcon_get_cable_state_(qphy->vbus_edev, EXTCON_USB); + state = extcon_get_state(qphy->vbus_edev, EXTCON_USB); if (state) phy_8x16_vbus_on(qphy); else
@@ -316,23 +316,20 @@ static int phy_8x16_probe(struct platform_device *pdev) goto off_clks; qphy->vbus_notify.notifier_call = phy_8x16_vbus_notify; - ret = extcon_register_notifier(qphy->vbus_edev, EXTCON_USB, - &qphy->vbus_notify); + ret = devm_extcon_register_notifier(&pdev->dev, qphy->vbus_edev, + EXTCON_USB, &qphy->vbus_notify); if (ret < 0) goto off_power; ret = usb_add_phy_dev(&qphy->phy); if (ret) - goto off_extcon; + goto off_power; qphy->reboot_notify.notifier_call = phy_8x16_reboot_notify; register_reboot_notifier(&qphy->reboot_notify); return 0; -off_extcon: - extcon_unregister_notifier(qphy->vbus_edev, EXTCON_USB, - &qphy->vbus_notify); off_power: regulator_bulk_disable(ARRAY_SIZE(qphy->regulator), qphy->regulator); off_clks:
@@ -347,8 +344,6 @@ static int phy_8x16_remove(struct platform_device *pdev) struct phy_8x16 *qphy = platform_get_drvdata(pdev); unregister_reboot_notifier(&qphy->reboot_notify); - extcon_unregister_notifier(qphy->vbus_edev, EXTCON_USB, - &qphy->vbus_notify); /* * Ensure that D+/D- lines are routed to uB connector, so
--
1.9.1