[PATCH net 2/3] dt-bindings: net: add DT bindings for realtek phys
flat view
STALE3619d
SUPERSEDED
From: jbrunet@baylibre.com (Jerome Brunet)
Date: 2016-11-15 14:29:59
Also in:
linux-amlogic, linux-devicetree, lkml, netdev
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Revision v1 of 4 in this series.
Revisions (4)
- v1 current
- v2 [diff vs current]
- v3 [diff vs current]
- v4 [diff vs current]
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <redacted> --- .../devicetree/bindings/net/realtek-phy.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/realtek-phy.txt
diff --git a/Documentation/devicetree/bindings/net/realtek-phy.txt b/Documentation/devicetree/bindings/net/realtek-phy.txt
new file mode 100644
index 000000000000..dc2845a6b387
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/realtek-phy.txt@@ -0,0 +1,20 @@ +Realtek Ethernet PHY + +Some boards require special tuning values of the phy. + +Optional properties: + +realtek,disable-eee-1000t: +realtek,disable-eee-100tx: + If set, respectively disable 1000-BaseT and 100-BaseTx energy efficient + ethernet capabilty advertisement + default: Leave the phy default settings unchanged (capabilities advertised) + +Example: + +&mdio0 { + ethernetphy0: ethernet-phy at 0 { + reg = <0>; + realtek,disable-eee-1000t; + }; +};
--
2.7.4