On Tue, 2016-11-01 at 19:28 +0800, HS Liao wrote:

Hi,

This is Mediatek MT8173 Command Queue(CMDQ) driver. The CMDQ is used
to help write registers with critical time limitation, such as
updating display configuration during the vblank. It controls Global
Command Engine (GCE) hardware to achieve this requirement.

These patches have a build dependency on top of v4.9-rc1.

Changes since v15:
 - separate "suspend and resume" patch from "save energy" patch
 - don't stop running tasks in cmdq_suspend()
   (i.e. leave no running tasks guarantee to clients)

Best regards,
HS Liao

HS Liao (5):
  dt-bindings: soc: Add documentation for the MediaTek GCE unit
  CMDQ: Mediatek CMDQ driver
  arm64: dts: mt8173: Add GCE node
  CMDQ: suspend and resume
  CMDQ: save energy

 .../devicetree/bindings/mailbox/mtk-gce.txt        |  43 ++
 arch/arm64/boot/dts/mediatek/mt8173.dtsi           |  10 +
 drivers/mailbox/Kconfig                            |  10 +
 drivers/mailbox/Makefile                           |   2 +
 drivers/mailbox/mtk-cmdq-mailbox.c                 | 632 +++++++++++++++++++++
 drivers/soc/mediatek/Kconfig                       |  11 +
 drivers/soc/mediatek/Makefile                      |   1 +
 drivers/soc/mediatek/mtk-cmdq-helper.c             | 310 ++++++++++
 include/linux/mailbox/mtk-cmdq-mailbox.h           |  67 +++
 include/linux/soc/mediatek/mtk-cmdq.h              | 182 ++++++
 10 files changed, 1268 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mailbox/mtk-gce.txt
 create mode 100644 drivers/mailbox/mtk-cmdq-mailbox.c
 create mode 100644 drivers/soc/mediatek/mtk-cmdq-helper.c
 create mode 100644 include/linux/mailbox/mtk-cmdq-mailbox.h
 create mode 100644 include/linux/soc/mediatek/mtk-cmdq.h

Hi Jassi, Matthias,

Sorry to disturb you.
Do you have any further comment on CMDQ v16?

Thanks.
HS