On Wed, Nov 09, 2016 at 08:29:23PM +0000, Ard Biesheuvel wrote:

Hi Bjorn,

On 9 November 2016 at 20:06, Bjorn Helgaas [off-list ref] wrote:

quoted

On Wed, Nov 09, 2016 at 02:25:56PM -0500, Christopher Covington wrote:

quoted

Hi Bjorn,

[...]

quoted

quoted

We're working to add the PNP0C02 resource to future firmware, but it's
not in the current firmware. Are dmesg and /proc/iomem from the
current firmware interesting or should we wait for the update to file?

Note that the ECAM space is not the only thing that should be
described via these PNP0C02 devices.  *All* non-enumerable resources
should be described by the _CRS method of some ACPI device.  Here's a
sample from my laptop:

  PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
  system 00:01: [io  0x1800-0x189f] could not be reserved
  system 00:01: [io  0x0800-0x087f] has been reserved
  system 00:01: [io  0x0880-0x08ff] has been reserved
  system 00:01: [io  0x0900-0x097f] has been reserved
  system 00:01: [io  0x0980-0x09ff] has been reserved
  system 00:01: [io  0x0a00-0x0a7f] has been reserved
  system 00:01: [io  0x0a80-0x0aff] has been reserved
  system 00:01: [io  0x0b00-0x0b7f] has been reserved
  system 00:01: [io  0x0b80-0x0bff] has been reserved
  system 00:01: [io  0x15e0-0x15ef] has been reserved
  system 00:01: [io  0x1600-0x167f] has been reserved
  system 00:01: [io  0x1640-0x165f] has been reserved
  system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
  system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
  system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
  system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
  system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved
  system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
  system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
  system 00:01: [mem 0xf7fe0000-0xf7ffffff] has been reserved
  system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)

Do you have firmware in the field that may not get updated?  If so,
I'd like to see the whole solution for that firmware, including the
MCFG quirk (which tells the PCI core where the ECAM region is) and
whatever PNP0C02 quirk you figure out to actually reserve the region.

I proposed a PNP0C02 quirk to Duc along these lines of the below.  I
don't actually know if it's feasible, but it didn't look as bad as I
expected, so I'd kind of like somebody to try it out.  I think you
would have to call this via a DMI hook (do you have DMI on arm64?),
maybe from pnp_init() or similar.

We do have SMBIOS/DMI on arm64, but we have been successful so far not
to rely on it for quirks, and we'd very much like to keep it that way.

Since this ACPI _CRS method has nothing to do with SMBIOS/DMI, surely
there is a better way to wire up the reservation code to the
information exposed by ACPI?

I'm open to other ways, feel free to propose one :)

If you do a quirk, you need some way to identify the machine/firmware
combination, because you don't want to apply the quirk on every
machine.  You're trying to work around a firmware issue, so you
probably want something tied to the firmware version.  On x86, that's
typically done with DMI.

Bjorn