Hi Alexandre,


On 11/03/2016 09:52 AM, Alexandre Torgue wrote:

Hi Gabriel,

On 10/14/2016 11:18 AM, gabriel.fernandez at st.com wrote:

quoted

From: Gabriel Fernandez <redacted>

v2:
 - rename compatible property "st,stm32f46xx-rcc" into 
"st,stm32f469-rcc"
 - cosmetic: remove bad copy/paste

This patch-set introduce RTC and QSPI clocks for STM32F4 socs
RTC clock has 3 parents clock oscillators (lsi/lse/hse_rtc)

example to use rtc clock:

        rtc: rtc at 40002800 {
            compatible = "st,stm32-rtc";
            reg = <0x40002800 0x400>;
            ...
            clocks = <&rcc 1 CLK_RTC>;

            assigned-clocks =  <&rcc 1 CLK_RTC>;
            assigned-clock-parents = <&rcc 1 CLK_LSE>;
            ...
        };

Gabriel Fernandez (6):
  clk: stm32f4: Add LSI & LSE clocks
  ARM: dts: stm32f429: add LSI and LSE clocks
  arm: stmf32: Enable SYSCON
  clk: stm32f4: Add RTC clock
  clk: stm32f469: Add QSPI clock
  ARM: dts: stm32f429: Add QSPI clock

You sent a V3 without DT patches. Should I take DT patches from this 
V2 patchset ?

Regards
Alex

Yes, no problem

Thanks !

BR.

Gabriel

quoted

 .../devicetree/bindings/clock/st,stm32-rcc.txt     |   4 +-
 arch/arm/boot/dts/stm32f429.dtsi                   |  18 +
 arch/arm/boot/dts/stm32f469-disco.dts              |   4 +
 arch/arm/configs/stm32_defconfig                   |   1 +
 drivers/clk/clk-stm32f4.c                          | 442 
++++++++++++++++++++-
 5 files changed, 447 insertions(+), 22 deletions(-)