On 10/31/2016 08:05 PM, Andrew Lunn wrote:

On Mon, Oct 31, 2016 at 05:56:24PM +0100, Neil Armstrong wrote:

quoted

Add driver for the Internal RMII PHY found in the Amlogic Meson GXL SoCs.

This PHY seems to only implement some standard registers and need some
workarounds to provide autoneg values from vendor registers.

Some magic values are currently used to configure the PHY, and this a
temporary setup until clarification about these registers names and
registers fields are provided by Amlogic.

Signed-off-by: Neil Armstrong <redacted>
---
 drivers/net/phy/Kconfig     |  5 +++
 drivers/net/phy/Makefile    |  1 +
 drivers/net/phy/meson-gxl.c | 81 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 87 insertions(+)
 create mode 100644 drivers/net/phy/meson-gxl.c

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 2651c8d..09342b6 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig

@@ -226,6 +226,11 @@ config DP83867_PHY
 	---help---
 	  Currently supports the DP83867 PHY.
 
+config MESON_GXL_PHY
+	tristate "Amlogic Meson GXL Internal PHY"
+	---help---
+	  Currently has a driver for the Amlogic Meson GXL Internal PHY
+

Hi Neil

Please keep them in alphabetic order. This goes after Marvell.

quoted

 config FIXED_PHY
 	tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs"
 	depends on PHYLIB

diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index e58667d..1511b3e 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile

@@ -44,6 +44,7 @@ obj-$(CONFIG_MARVELL_PHY)	+= marvell.o
 obj-$(CONFIG_MICREL_KS8995MA)	+= spi_ks8995.o
 obj-$(CONFIG_MICREL_PHY)	+= micrel.o
 obj-$(CONFIG_MICROCHIP_PHY)	+= microchip.o
+obj-$(CONFIG_MESON_GXL_PHY)	+= meson-gxl.o
 obj-$(CONFIG_MICROSEMI_PHY)	+= mscc.o

Again, alphabetic order.

       Andrew

Sorry, rebase issue.

Neil