On Tue, Oct 25, 2016 at 12:22:20AM +0200, Linus Walleij wrote:

The SMSC9112 ethernet controller is connected to chip select 2
on the EBI2 bus on the APQ8060 Dragonboard. We set this up by
activating EBI2, creating a chipselect entry as a subnode, and then
putting the ethernet controller in a subnode of the chipselect.

After the chipselect is configured, the SMSC device will be
instantiated.

Signed-off-by: Linus Walleij <redacted>

Thanks.  Picked this one up.


Andy