[PATCH v2 5/8] dt/bindings: Update binding for PM domain idle states
From: Lina Iyer <hidden>
Date: 2016-10-07 22:36:58
Also in:
linux-arm-msm, linux-devicetree, linux-pm
Subsystem:
generic pm domains, open firmware and flattened device tree bindings, the rest · Maintainers:
Ulf Hansson, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Update DT bindings to describe idle states of PM domains. This patch is based on the original patch by Marc Titinger. Cc: <redacted> Signed-off-by: Marc Titinger <redacted> Signed-off-by: Ulf Hansson <redacted> Signed-off-by: Lina Iyer <redacted> Acked-by: Rob Herring <robh@kernel.org> --- .../devicetree/bindings/power/power_domain.txt | 38 ++++++++++++++++++++++ 1 file changed, 38 insertions(+)
diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt
index 025b5e7..7f8f27e 100644
--- a/Documentation/devicetree/bindings/power/power_domain.txt
+++ b/Documentation/devicetree/bindings/power/power_domain.txt@@ -29,6 +29,10 @@ Optional properties: specified by this binding. More details about power domain specifier are available in the next section. +- domain-idle-states : A phandle of an idle-state that shall be soaked into a + generic domain power state. The idle state definitions are + compatible with arm,idle-state specified in [1]. + Example: power: power-controller at 12340000 {
@@ -59,6 +63,38 @@ The nodes above define two power controllers: 'parent' and 'child'. Domains created by the 'child' power controller are subdomains of '0' power domain provided by the 'parent' power controller. +Example 3: + parent: power-controller at 12340000 { + compatible = "foo,power-controller"; + reg = <0x12340000 0x1000>; + #power-domain-cells = <0>; + domain-idle-states = <&DOMAIN_RET>, <&DOMAIN_PWR_DN>; + }; + + child: power-controller at 12341000 { + compatible = "foo,power-controller"; + reg = <0x12341000 0x1000>; + power-domains = <&parent 0>; + #power-domain-cells = <0>; + domain-idle-states = <&DOMAIN_PWR_DN>; + }; + + DOMAIN_RET: state at 0 { + compatible = "arm,idle-state"; + reg = <0x0>; + entry-latency-us = <1000>; + exit-latency-us = <2000>; + min-residency-us = <10000>; + }; + + DOMAIN_PWR_DN: state at 1 { + compatible = "arm,idle-state"; + reg = <0x1>; + entry-latency-us = <5000>; + exit-latency-us = <8000>; + min-residency-us = <7000>; + }; + ==PM domain consumers== Required properties:
@@ -76,3 +112,5 @@ Example: The node above defines a typical PM domain consumer device, which is located inside a PM domain with index 0 of a power controller represented by a node with the label "power". + +[1]. Documentation/devicetree/bindings/arm/idle-states.txt
--
2.7.4