[PATCH 2/5] Documentation: devicetree: net: add NS2 bindings to amac
From: andrew@lunn.ch (Andrew Lunn)
Date: 2016-10-27 14:55:38
Also in:
linux-devicetree, lkml, netdev
On Wed, Oct 26, 2016 at 03:35:58PM -0400, Jon Mason wrote:
quoted hunk ↗ jump to hunk
Signed-off-by: Jon Mason <redacted> --- Documentation/devicetree/bindings/net/brcm,amac.txt | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)diff --git a/Documentation/devicetree/bindings/net/brcm,amac.txt b/Documentation/devicetree/bindings/net/brcm,amac.txt index ba5ecc1..f92caee 100644 --- a/Documentation/devicetree/bindings/net/brcm,amac.txt +++ b/Documentation/devicetree/bindings/net/brcm,amac.txt@@ -2,15 +2,18 @@ Broadcom AMAC Ethernet Controller Device Tree Bindings ------------------------------------------------------------- Required properties: - - compatible: "brcm,amac" or "brcm,nsp-amac" + - compatible: "brcm,amac", "brcm,nsp-amac", or "brcm,ns2-amac" - reg: Address and length of the GMAC registers, Address and length of the GMAC IDM registers + Address and length of the NIC Port Manager registers (optional) - reg-names: Names of the registers. Must have both "amac_base" and - "idm_base" + "idm_base". "nicpm_base" is optional (required for NS2) - interrupts: Interrupt number Optional properties: - mac-address: See ethernet.txt file in the same directory +- brcm,enet-phy-lane-swap: + boolean; Swap the PHY lanes (needed on some SKUs of NS2)
Maybe i'm missing something here, but the patch to the PHY swapped the lanes. This seems to be a PHY property, not a MAC property. And it swapped them unconditionally.... Andrew