[V4, 1/3] ACPI, PCI, IRQ: assign ISA IRQ directly during early boot stages
From: Jonathan Liu <hidden>
Date: 2016-10-24 04:21:49
Also in:
linux-acpi, linux-arm-msm, linux-pci, lkml
From: Jonathan Liu <hidden>
Date: 2016-10-24 04:21:49
Also in:
linux-acpi, linux-arm-msm, linux-pci, lkml
On 24 October 2016 at 15:17, Sinan Kaya [off-list ref] wrote:
Thanks, On 10/22/2016 11:48 PM, Jonathan Liu wrote:quoted
This series fixes one or more network adapters not working in Linux 32-bit x86 guest running inside VirtualBox if I have 4 network adapters enabled. The following message no longer appears in the kernel log: ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or acpi=off Tested-by: Jonathan Liu <redacted>I'm hoping that you can retest V5 so that Rafael can pull in your tested-by into the commit message. -- Sinan Kaya Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc. Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
Sure. Please CC me when you submit V5. Regards, Jonathan