[PATCH 2/2] pinctrl: stm32: move gpio irqs binding to optional
From: Alexandre TORGUE <hidden>
Date: 2016-10-20 13:27:52
Also in:
linux-devicetree, linux-gpio, lkml
Subsystem:
open firmware and flattened device tree bindings, pin control subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Walleij, Linus Torvalds
stm32 pinctrl driver could be probed even if no interrupt controller is defined to manage gpio irqs. Entries related to gpio irq management are moved to optional. Signed-off-by: Alexandre TORGUE <redacted>
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
index f9753c4..b24583a 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt@@ -14,11 +14,6 @@ Required properies: - #size-cells : The value of this property must be 1 - ranges : defines mapping between pin controller node (parent) to gpio-bank node (children). - - interrupt-parent: phandle of the interrupt parent to which the external - GPIO interrupts are forwarded to. - - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node - which includes IRQ mux selection register, and the offset of the IRQ mux - selection register. - pins-are-numbered: Specify the subnodes are using numbered pinmux to specify pins.
@@ -37,6 +32,11 @@ Required properties: Optional properties: - reset: : Reference to the reset controller + - interrupt-parent: phandle of the interrupt parent to which the external + GPIO interrupts are forwarded to. + - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node + which includes IRQ mux selection register, and the offset of the IRQ mux + selection register. Example: #include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
--
1.9.1