[PATCH v4 05/10] ARM: dts: sun8i-h3: add sun8i-emac ethernet driver
From: clabbe.montjoie@gmail.com (Corentin Labbe)
Date: 2016-10-07 08:30:42
Also in:
linux-devicetree, lkml, netdev
Subsystem:
the rest · Maintainer:
Linus Torvalds
The sun8i-emac is an ethernet MAC hardware that support 10/100/1000 speed. This patch enable the sun8i-emac on the Allwinner H3 SoC Device-tree. The SoC H3 have an internal PHY, so optionals syscon and ephy are set. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> --- arch/arm/boot/dts/sun8i-h3.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 1101d2f..d218154 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi@@ -446,6 +446,30 @@ status = "disabled"; }; + emac: ethernet at 1c30000 { + compatible = "allwinner,sun8i-h3-emac"; + syscon = <&syscon>; + reg = <0x01c30000 0x104>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "ahb"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "ahb"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + int_mii_phy: ethernet-phy at 1 { + reg = <1>; + clocks = <&ccu CLK_BUS_EPHY>; + resets = <&ccu RST_BUS_EPHY>; + }; + }; + }; + gic: interrupt-controller at 01c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>,
--
2.7.3