[PATCH v7 02/11] arm64: dts: r8a7795: salvator-x: enable UHS for SDHI 0 & 3
From: Simon Horman <hidden>
Date: 2016-09-13 10:56:59
Also in:
linux-mmc, linux-renesas-soc
Subsystem:
arm/risc-v/renesas architecture, the rest · Maintainers:
Geert Uytterhoeven, Magnus Damm, Linus Torvalds
From: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <redacted> --- v6 * Updated patch prefix: s/salvator/&-x/ v5 * Added to series, previously posted by Wolfram independently --- arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index b1eab6876f8c..ff4e4fe843ed 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts@@ -237,11 +237,25 @@ sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; }; sdhi3_pins: sd3 { groups = "sdhi3_data4", "sdhi3_ctrl"; function = "sdhi3"; + power-source = <3300>; + }; + + sdhi3_pins_uhs: sd3_uhs { + groups = "sdhi3_data4", "sdhi3_ctrl"; + function = "sdhi3"; + power-source = <1800>; }; sound_pins: sound {
@@ -371,25 +385,29 @@ &sdhi0 { pinctrl-0 = <&sdhi0_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi0>; vqmmc-supply = <&vccq_sdhi0>; cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; bus-width = <4>; + sd-uhs-sdr50; status = "okay"; }; &sdhi3 { pinctrl-0 = <&sdhi3_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdhi3_pins_uhs>; + pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi3>; vqmmc-supply = <&vccq_sdhi3>; cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; bus-width = <4>; + sd-uhs-sdr50; status = "okay"; };
--
2.7.0.rc3.207.g0ac5344