[PATCH 8/8] ARM: pxa/lubbock: add pcmcia clock

Russell King - ARM Linux [off-list ref] writes:

On Tue, Sep 06, 2016 at 07:17:09PM +0200, Robert Jarzmik wrote:

quoted

Russell King [off-list ref] writes:

quoted

Add the required PCMCIA clock for the SA1111 "1800" device.  This clock
is used to compute timing information for the PCMCIA interface in the
SoC device, rather than the SA1111.  Hence, the provision of this clock
is a convenience for the driver and does not reflect the hardware, so
this must not be copied into DT.

Signed-off-by: Russell King <redacted>

Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
But more importantly:
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>

Thanks Robert.  I guess no one else is be interested in these patches,
so I'm going to drop them into -next today, and send them on Friday or
over this weekend.

Great !!!!

I'll keep the irq_get_chip() workaround in my private tree for now so that my
automated testing farm can also test the compact flash card. And yes, /dev/hda1
appeared on my lubbock, with a good old MSDOS filesystem :))))

Thanks for the time taken for explanations, I appreciated.

Cheers.

-- 
Robert