[PATCH v2 2/2] ARM64: dts: meson-gxbb: add the SDIO pins
From: martin.blumenstingl@googlemail.com (Martin Blumenstingl)
Date: 2016-09-11 12:39:18
Also in:
linux-amlogic, linux-gpio
Subsystem:
arm/amlogic meson soc support, the rest · Maintainers:
Neil Armstrong, Kevin Hilman, Linus Torvalds
From: Neil Armstrong <redacted> This is used to configure the pins of the sd_emmc_a controller to which an SDIO module is connected (when available). Signed-off-by: Neil Armstrong <redacted> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> --- arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index c84cacf..fe2a1fc 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi@@ -394,6 +394,25 @@ }; }; + sdio_pins: sdio { + mux { + groups = "sdio_d0", + "sdio_d1", + "sdio_d2", + "sdio_d3", + "sdio_cmd", + "sdio_clk"; + function = "sdio"; + }; + }; + + sdio_irq_pins: sdio_irq { + mux { + groups = "sdio_irq"; + function = "sdio"; + }; + }; + uart_a_pins: uart_a { mux { groups = "uart_tx_a",
--
2.9.3