On 30/09/2016 at 13:04:28 +0200, Richard Genoud wrote :

Anyway, the problematics setups are all the setups with USMODE_HWHS
enabled on platform without Fifos or PDC,
i.e. all platforms but sama5d2 (Cyrille, correct me if I'm wrong).

This is a wrong assumption, at91rm9200 to at91sam9g45 all have a pdc.
Please, don't break those platforms.

The only affected platforms are sam9x5, sama5d3 and sama5d4.

For instance, on sam9x5, if DMA is used, USMODE_HWHS enabled and
RTS/CTS NOT muxed as GPIOS,
it's like there was no flow control at all (the CTS pin doesn't
disable the transmitter).

Since atmel HW guys said that USMODE_HWHS is broken for platforms !sama5d2,
(cfhttps://lkml.org/lkml/2016/9/7/598 ),  I honestly didn't dig any
further into that flag.


Regards,
Richard

-- 
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com