[PATCH 13/26] drm/rockchip: dw-mipi-dsi: allow commands in panel_disable
From: John Keeping <hidden>
Date: 2016-09-19 17:22:26
Also in:
dri-devel, linux-rockchip, lkml
Subsystem:
arm/rockchip soc support, drm drivers, drm drivers and misc gpu patches, drm drivers for rockchip, the rest · Maintainers:
Heiko Stuebner, David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Sandy Huang, Heiko Stübner, Andy Yan, Linus Torvalds
Panel drivers may want to sent commands during the disable function, for example MIPI_DCS_SET_DISPLAY_OFF before the video signal ends. In order to send commands we need to write to registers, so pclk must be enabled. While changing this, remove the unnecessary code after the panel unprepare call which seems to be a workaround for a specific panel and thus belongs in the panel driver. Signed-off-by: John Keeping <redacted> --- drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
index 9ff1cac5ef63..5e343b54f0d0 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c@@ -857,24 +857,16 @@ static void dw_mipi_dsi_encoder_disable(struct drm_encoder *encoder) { struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder); - drm_panel_disable(dsi->panel); - if (clk_prepare_enable(dsi->pclk)) { dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__); return; } + drm_panel_disable(dsi->panel); + dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE); drm_panel_unprepare(dsi->panel); - dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE); - /* - * This is necessary to make sure the peripheral will be driven - * normally when the display is enabled again later. - */ - msleep(120); - - dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE); dw_mipi_dsi_disable(dsi); clk_disable_unprepare(dsi->pclk); }
--
2.10.0.278.g4f427b1.dirty