[PATCH v2 0/4] ARM: amlogic: Add spifc support to Amlogic's GXBB family

jbrunet [off-list ref] writes:

On Mon, 2016-09-12 at 13:38 -0700, Kevin Hilman wrote:

quoted

Jerome Brunet [off-list ref] writes:

quoted

This patch series adds the necessary pins, clocks and device tree
nodes to
enable the spifc controller on the GXBB family. I had to add the
nand pins
in pintctrl as the pinmux setting left by u-boot was conflicting
with the
spifc pinmux during my test on the P200.

This series seems to be missing a patch which enables the SPIfc on
the
P200 board for use with the on-board NOR flash.

Indeed, I did not provide this patch, on purpose.
The SPI-NOR at 4U2 on the P200 schematics was not present on the board
I have. I assumed this was the case for all other P200 as well.

In addition, to enable the SPI-NOR, you would also need to solder
something at 4R3 (SPI_CS signal disconnected by default)

OK, that makes seense.  I thought the NOR was on the board by default.

Finally, all the SPIfc lines are shared with the NAND controller which,
like the SPI-NOR, appears on the schematics (4CCN1) but is not soldered
on the actual hardware.

Of course, I can share such patch for testing purposes if you would
like me to.

Yeah, having a testing patch in the list archives would be useful.

Thanks,

Kevin