Thread (6 messages) 6 messages, 1 author, 2016-09-08
STALE3568d
Revisions (3)
  1. v1 current
  2. v2 [diff vs current]
  3. v3 [diff vs current]

[PATCH 3/5] ARM: dts: at91: sama5d4: use proper sckc compatible

From: Alexandre Belloni <hidden>
Date: 2016-09-08 11:57:37
Also in: linux-clk, lkml
Subsystem: the rest · Maintainer: Linus Torvalds

Now that there is support for the sama5d4 slow clock controller, use its
driver.

Signed-off-by: Alexandre Belloni <redacted>
---
 arch/arm/boot/dts/sama5d4.dtsi | 27 ++++-----------------------
 1 file changed, 4 insertions(+), 23 deletions(-)
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 65e725fb5679..fe094263595c 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -1314,30 +1314,11 @@
 				status = "disabled";
 			};
 
-			sckc at fc068650 {
-				compatible = "atmel,at91sam9x5-sckc";
+			clk32k: sckc at fc068650 {
+				compatible = "atmel,sama5d4-sckc";
 				reg = <0xfc068650 0x4>;
-
-				slow_rc_osc: slow_rc_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
-					#clock-cells = <0>;
-					clock-frequency = <32768>;
-					clock-accuracy = <250000000>;
-					atmel,startup-time-usec = <75>;
-				};
-
-				slow_osc: slow_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-osc";
-					#clock-cells = <0>;
-					clocks = <&slow_xtal>;
-					atmel,startup-time-usec = <1200000>;
-				};
-
-				clk32k: slowck {
-					compatible = "atmel,at91sam9x5-clk-slow";
-					#clock-cells = <0>;
-					clocks = <&slow_rc_osc &slow_osc>;
-				};
+				#clock-cells = <0>;
+				clocks = <&slow_xtal>;
 			};
 
 			rtc at fc0686b0 {
-- 
2.9.3
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help