Dear Rui,

On Tue, 2016-09-06 at 08:30 +0800, Zhang Rui wrote:

On ?, 2016-09-06 at 08:24 +0800, Zhang Rui wrote:

quoted

On ?, 2016-08-18 at 11:50 +0800, Dawei Chien wrote:

quoted

This adds the thermal controller and auxadc nodes
to the Mediatek MT2701 dtsi file.

Signed-off-by: Dawei Chien <redacted>
---
This patch depned on:
https://patchwork.kernel.org/patch/9249589/
https://patchwork.kernel.org/patch/9249589/

Hmm, does this mean that I should take all these three patches and
hold
the patches in next merge window until the above patch has been
merged?

Yes, this patch is base on auxadc patchset.

Patch 3/3 can not be applied on top of upstream kernel, so I guess it
still has some other dependencies.
I think I can apply patch 1, 2 first. And patch 3/3 should be handled
in the dt tree.

Sorry, this patch is also need Mediatek's clock patchset what I miss to
add in dependency list, I would resend this dt tree once clock patch
merge, or resend this for right dependency on next version, thank you.

thanks,
rui

quoted

thanks,
rui 

quoted

---
 arch/arm/boot/dts/mt2701.dtsi |   44
+++++++++++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/arch/arm/boot/dts/mt2701.dtsi

b/arch/arm/boot/dts/mt2701.dtsi
index e9150a4..cee4724 100644

--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi

@@ -87,6 +87,36 @@
 		clock-output-names = "rtc32k";
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu_thermal {
+			polling-delay-passive = <1000>; /*

milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+
+			thermal-sensors = <&thermal 0>;
+			sustainable-power = <1000>;
+
+			trips {
+				threshold: trip-point at 0 {
+					temperature = <68000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				target: trip-point at 1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit at 0 {
+					temperature = <115000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupt-parent = <&gic>;

@@ -222,4 +252,18 @@
 		clock-names = "baud", "bus";
 		status = "disabled";
 	};
+
+	thermal: thermal at 1100b000 {
+		#thermal-sensor-cells = <0>;
+		compatible = "mediatek,mt2701-thermal";
+		reg = <0 0x1100b000 0 0x1000>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_THERM>, <&pericfg

CLK_PERI_AUXADC>;
+		clock-names = "therm", "auxadc";
+		resets = <&pericfg 0x10>;
+		reset-names = "therm";
+		mediatek,auxadc = <&auxadc>;
+		mediatek,apmixedsys = <&apmixedsys>;
+	};
+
 };

--
To unsubscribe from this list: send the line "unsubscribe linux-pm"
in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html