[PATCH v3 1/4] pwm: Add support for Meson PWM Controller
From: Neil Armstrong <hidden>
Date: 2016-09-05 09:20:38
Also in:
linux-amlogic, linux-pwm, lkml
On 09/05/2016 11:00 AM, Thierry Reding wrote:
On Mon, Aug 22, 2016 at 05:36:30PM +0200, Neil Armstrong wrote:quoted
Add support for the PWM controller found in the Amlogic SoCs. This driver supports the Meson8b and GXBB SoCs. Signed-off-by: Neil Armstrong <redacted> --- drivers/pwm/Kconfig | 9 + drivers/pwm/Makefile | 1 + drivers/pwm/pwm-meson.c | 528 ++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 538 insertions(+) create mode 100644 drivers/pwm/pwm-meson.c
Hi Thierry,
Hi Neil, sorry for taking so long to review this. I had actually started to write a review email since I had noticed a couple of slight oddities about the driver structure (primarily this was about how channel-specific data was split between struct meson_pwm_channel and struct meson_pwm_chip), but I ended up making some changes to the driver in order to see what my suggestions would look like, and if they would indeed improve things. But once I had done that, I thought it a bit pointless to make that into review comments and decided to just push what I had done and ask you to take a look, and if you had no objections to the changes take the driver for a spin to see if it still worked as expected.
Well, thanks ! I was wondering why it took so long, but the result look far best than what I achieved. The road was very long since the original Amlogic driver... I will try it out ASAP, but it looks very good for me. Your changes seems quite obvious, and such rework was necessary.
One other thing I noticed is that your ->get_state() implementation only reads the enable state, but from the looks of it it should be possible to read period and duty cycle information from hardware as well. I'm not going to reject the driver for that reason, just saying that it'd be good to have that implemented sometime in the future.
Yes, it was delayed for later since it's not a functional feature, I will certainly push an update with this later on.
I've pushed my modifications to the driver to the linux-pwm repository: https://git.kernel.org/cgit/linux/kernel/git/thierry.reding/linux-pwm.git/log/?h=for-next Alternatively you can also take a look at the for-4.9/drivers branch, but they're currently the same thing.
Great, I will give you a functional update ASAP.
Thierry
Thanks for the review, aww, s/review/rework/ ! Neil