[PATCH 2/2] ARM: dts: alt: add MMCIF support
From: Simon Horman <hidden>
Date: 2016-08-09 12:19:04
Also in:
linux-renesas-soc
Subsystem:
the rest · Maintainer:
Linus Torvalds
Define the Alt board dependent part of the MMCIF device node. Like the Silk the board has eMMC chip along with the necessary voltage regulator (note that the Vcc/Vccq regulator is dummy -- it's required by the MMCIF driver but doesn't actually exist on the board). Based on work for the Silk board by Vladimir Barinov and Sergei Shtylyov. Cc: Vladimir Barinov <redacted>. Cc: Sergei Shtylyov <redacted> Signed-off-by: Simon Horman <redacted> --- arch/arm/boot/dts/r8a7794-alt.dts | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index fe7c128cc965..8d1b35afaf82 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts@@ -30,6 +30,15 @@ reg = <0 0x40000000 0 0x40000000>; }; + d3_3v: regulator-d3-3v { + compatible = "regulator-fixed"; + regulator-name = "D3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed";
@@ -190,6 +199,11 @@ function = "vin0"; }; + mmcif0_pins: mmcif0 { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + }; + sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0";
@@ -228,6 +242,17 @@ }; }; +&mmcif0 { + pinctrl-0 = <&mmcif0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&d3_3v>; + vqmmc-supply = <&d3_3v>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + &sdhi0 { pinctrl-0 = <&sdhi0_pins>; pinctrl-names = "default";
--
2.7.0.rc3.207.g0ac5344