[PATCH v2] ARM: dts: add PM8058 LEDs to the APQ8060 Dragonboard
From: Linus Walleij <hidden>
Date: 2016-08-19 08:46:47
Also in:
linux-arm-msm, linux-leds
Subsystem:
the rest · Maintainer:
Linus Torvalds
This adds the PM8058 LEDs as used in the platform. Cc: linux-arm-msm at vger.kernel.org Cc: linux-leds at vger.kernel.org Cc: Andy Gross <redacted> Cc: Stephen Boyd <redacted> Cc: Jacek Anaszewski <redacted> Reviewed-by: Bjorn Andersson <redacted> Signed-off-by: Linus Walleij <redacted> --- ChangeLog v1->v2: - Rename the infrared LED to "pm8058:infrared:proximitysensor" --- arch/arm/boot/dts/qcom-apq8060-dragonboard.dts | 39 ++++++++++++++++++++++++++ 1 file changed, 39 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index 0abc93e5bb00..6c0038398ef2 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts@@ -239,6 +239,45 @@ }; }; }; + + led at 48 { + /* + * The keypad LED @0x48 is routed to + * the sensor board where it is + * connected to an infrared LED + * SFH4650 (60mW, @850nm) next to the + * ambient light and proximity sensor + * Capella Microsystems CM3605. + */ + compatible = "qcom,pm8058-keypad-led"; + reg = <0x48>; + label = "pm8058:infrared:proximitysensor"; + default-state = "off"; + }; + led at 131 { + compatible = "qcom,pm8058-led"; + reg = <0x131>; + label = "pm8058:red"; + default-state = "off"; + }; + led at 132 { + /* + * This is actually green too on my + * board, but documented as yellow. + */ + compatible = "qcom,pm8058-led"; + reg = <0x132>; + label = "pm8058:yellow"; + default-state = "off"; + linux,default-trigger = "mmc0"; + }; + led at 133 { + compatible = "qcom,pm8058-led"; + reg = <0x133>; + label = "pm8058:green"; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; }; };
--
2.7.4