[PATCH 1/4] soc: qcom: add an EBI2 device tree bindings

On Mon, Aug 29, 2016 at 12:21 PM, Linus Walleij
[off-list ref] wrote:

On Mon, Aug 29, 2016 at 4:06 PM, Rob Herring [off-list ref] wrote:

quoted

[Me]

quoted

That is very close to how
Documentation/devicetree/bindings/bus/imx-weim.txt
drivers/bus/imx-weim.c
does things, just with the additional property arrays.

Maybe so, but I'm trying to bring some consistency here, so I'd
suggest looking at newer ones like atmel IIRC.

The Uniphier bindings also look like this and it's the most recent
bus driver ...
Documentation/devicetree/bindings/bus/uniphier-system-bus.txt

But OK it's probably best to follow an example so I get it the way
you prefer. Which binding and driver is that?

There's no Atmel stuff in Documentation/devicetree/bindings/bus/
nor drivers/bus from what I can tell, so just point out what you're
referring to here and I'll do my best to follow that example.

Argg, that's because it is in a different spot:

Documentation/devicetree/bindings/memory-controllers/atmel,ebi.txt

Time to clean things up... bindings/bus is supposed to be internal,
on-chip buses.

Rob