[PATCH 2/2] ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board
flat view
STALE3696d
From: Icenowy Zheng <hidden>
Date: 2016-08-23 06:44:51
Also in:
linux-devicetree
Subsystem:
the rest · Maintainer:
Linus Torvalds
UART1 is connected to the bluetooth part of RTL8723BS WiFi/BT combo card on iNet D978 Rev2 board. Enable the UART1 to make it possible to use the modified hciattach by Realtek to drive the BT part of RTL8723BS. Signed-off-by: Icenowy Zheng <redacted> --- arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts | 11 +++++++++++ 1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts
index 78823d8..3ac22d4 100644
--- a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts
+++ b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts@@ -48,6 +48,10 @@ model = "INet-D978 Rev 02"; compatible = "primux,inet-d978-rev2", "allwinner,sun8i-a33"; + aliases { + serial1 = &uart1; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default";
@@ -77,6 +81,13 @@ }; }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>, + <&uart1_pins_cts_rts_b>; + status = "okay"; +}; + &r_pio { led_pin_d978: led_pin_d978 at 0 { allwinner,pins = "PL5";
--
2.9.3