[PATCH] ARM: dts: armada-38x: Add NAND pinctrl information
From: Gregory CLEMENT <hidden>
Date: 2016-08-26 09:45:17
Also in:
linux-devicetree, lkml
Hi Chris, On mer., ao?t 24 2016, Chris Packham [off-list ref] wrote:
Add pin control information for the NAND flash interface. This interface is multiplexed with the device bus interface to the function is "dev" not "nand" as one might expect. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Applied on mvebu/dt Thanks, Gregory
quoted hunk
--- arch/arm/boot/dts/armada-38x.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+)diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 3312be6c82cc..30381d421d43 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi@@ -287,6 +287,15 @@ marvell,function = "spi1"; }; + nand_pins: nand-pins { + marvell,pins = "mpp22", "mpp34", "mpp23", + "mpp33", "mpp38", "mpp28", + "mpp40", "mpp42", "mpp35", + "mpp36", "mpp25", "mpp30", + "mpp32"; + marvell,function = "dev"; + }; + uart0_pins: uart-pins-0 { marvell,pins = "mpp0", "mpp1"; marvell,function = "ua0";-- 2.9.2.518.ged577c6.dirty
-- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com