[PATCH v2 1/3] ARM: dts: DRA7: Add "linux, pci-domain" property for pci dt nodes
flat view
STALE3727d
SUPERSEDED
From: Kishon Vijay Abraham I <hidden>
Date: 2016-08-01 11:16:11
Also in:
linux-devicetree, linux-omap, linux-pci, linux-renesas-soc, linux-samsung-soc, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Revision v2 of 4 in this series.
Revisions (4)
- v2 current
- v3 [diff vs current]
- v3 [diff vs current]
- v4 [diff vs current]
Since DRA7 has multiple PCIe Rootcomplex, add "linux,pci-domain" property to assign a PCI domain number to each of the host bridges. Signed-off-by: Kishon Vijay Abraham I <redacted> --- arch/arm/boot/dts/dra7.dtsi | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 40b69a5..45e9d2d 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi@@ -301,6 +301,7 @@ 0x82000000 0 0x20013000 0x13000 0 0xffed000>; #interrupt-cells = <1>; num-lanes = <1>; + linux,pci-domain = <0>; ti,hwmods = "pcie1"; phys = <&pcie1_phy>; phy-names = "pcie-phy0";
@@ -336,6 +337,7 @@ 0x82000000 0 0x30013000 0x13000 0 0xffed000>; #interrupt-cells = <1>; num-lanes = <1>; + linux,pci-domain = <1>; ti,hwmods = "pcie2"; phys = <&pcie2_phy>; phy-names = "pcie-phy0";
--
1.7.9.5