[PATCH net-next 06/10] drivers: net: xgene: Change port init sequence
From: Iyappan Subramanian <hidden>
Date: 2016-07-30 00:33:59
Also in:
linux-devicetree, netdev
Subsystem:
applied micro (apm) x-gene soc ethernet driver, networking drivers, the rest · Maintainers:
Iyappan Subramanian, Keyur Chudgar, Quan Nguyen, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
This patch rearranges the port initialization sequence as recommended by hardware specification. This patch also removes, mac_init() call from xgene_enet_link_state(), as it was not required. Signed-off-by: Iyappan Subramanian <redacted> Tested-by: Fushen Chen <redacted> --- drivers/net/ethernet/apm/xgene/xgene_enet_xgmac.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_xgmac.c b/drivers/net/ethernet/apm/xgene/xgene_enet_xgmac.c
index 9c6ad0d..d53c053 100644
--- a/drivers/net/ethernet/apm/xgene/xgene_enet_xgmac.c
+++ b/drivers/net/ethernet/apm/xgene/xgene_enet_xgmac.c@@ -216,12 +216,12 @@ static void xgene_xgmac_init(struct xgene_enet_pdata *pdata) data |= CFG_RSIF_FPBUFF_TIMEOUT_EN; xgene_enet_wr_csr(pdata, XG_RSIF_CONFIG_REG_ADDR, data); - xgene_enet_wr_csr(pdata, XG_CFG_BYPASS_ADDR, RESUME_TX); - xgene_enet_wr_csr(pdata, XGENET_RX_DV_GATE_REG_0_ADDR, 0); xgene_enet_rd_csr(pdata, XG_ENET_SPARE_CFG_REG_ADDR, &data); data |= BIT(12); xgene_enet_wr_csr(pdata, XG_ENET_SPARE_CFG_REG_ADDR, data); xgene_enet_wr_csr(pdata, XG_ENET_SPARE_CFG_REG_1_ADDR, 0x82); + xgene_enet_wr_csr(pdata, XGENET_RX_DV_GATE_REG_0_ADDR, 0); + xgene_enet_wr_csr(pdata, XG_CFG_BYPASS_ADDR, RESUME_TX); } static void xgene_xgmac_rx_enable(struct xgene_enet_pdata *pdata)
@@ -366,7 +366,6 @@ static void xgene_enet_link_state(struct work_struct *work) if (link_status) { if (!netif_carrier_ok(ndev)) { netif_carrier_on(ndev); - xgene_xgmac_init(pdata); xgene_xgmac_rx_enable(pdata); xgene_xgmac_tx_enable(pdata); netdev_info(ndev, "Link is Up - 10Gbps\n");
--
1.9.1