[PATCH v2 3/6] binding-doc: usb: usb-device: add optional properties for power sequence
From: robh@kernel.org (Rob Herring)
Date: 2016-07-16 22:31:59
Also in:
linux-devicetree, linux-pm
On Wed, Jul 13, 2016 at 10:06:47AM +0800, Peter Chen wrote:
quoted hunk ↗ jump to hunk
Add optional properties for power sequence. Signed-off-by: Peter Chen <redacted> --- Documentation/devicetree/bindings/usb/usb-device.txt | 9 +++++++++ 1 file changed, 9 insertions(+)diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt index 1c35e7b..0ccaadf 100644 --- a/Documentation/devicetree/bindings/usb/usb-device.txt +++ b/Documentation/devicetree/bindings/usb/usb-device.txt@@ -13,6 +13,10 @@ Required properties: - reg: the port number which this device is connecting to, the range is 1-31. +Optional properties: +power sequence properties, see +Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt for detail + Example: &usb1 {@@ -24,5 +28,10 @@ Example: hub: genesys at 1 { compatible = "usb5e3,608"; reg = <1>; + + power-sequence; + clocks = <&clks IMX6SX_CLK_CKO>; + reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* hub reset pin */ + reset-duration-us = <10>;
These belong in the binding doc for the hub.
}; } -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo at vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html